Alpine iDA-305 owner manual Getting Started, Turning Power On and Off, Initial System Start-Up

Page 8

Getting Started

Double Action encoder

 

SOURCE

/ENTER

VIEW

 

 

 

(FUNCTION/SETUP)

Accessory List

 

 

•

Digital Media receiver

1

•

Power cable

1

•

Mounting sleeve

1

•

Carrying case

1

•

Front frame

1

•

Bracket key

2

•

Screw (M5x8)

4

•

USB cable

1

• iPod Dock interface cable

1

•

Owner’s Manual

1 set

Turning Power On and Off

Press SOURCE to turn on the unit.

•The unit can be turned on by pressing any other button except

(Release), Double Action encoder and VIEW. The unit is also automatically turned on if an iPhone/iPod or USB memory is connected.

Press and hold SOURCE for at least 2 seconds to turn off the unit.

Detaching and Attaching the Front Panel

Detaching

1 Turn off the unit power.

2 Press (Release) at the lower left side until the front panel pops out.

3 Grasp the left side of the front panel and pull it out.

•The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel.) This is not a malfunction.

•To protect the front panel, place it in the supplied carrying case.

6-EN

Attaching

1 Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit.

2 Push the left side of the front panel until it locks firmly into the main unit.

•Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit.

•Attach the front panel carefully. Hold the panel by its sides to avoid pushing any buttons by mistake.

Initial System Start-Up

Be sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc.

1 Turn off the unit power.

2 Press (Release) to remove the front panel.

3 Press RESET with a ballpoint pen or similar pointed object.

Adjusting Volume

Rotate the Double Action encoder until the desired sound is obtained.

Setting the Time and Calendar

1 Press and hold (FUNCTION/SETUP) for at least 2 seconds to activate the SETUP selection mode.

2 Rotate the Double Action encoder to select “General”, and then press /ENTER.

Bluetooth General Display iPod XM* SIRIUS* HD Radio* Audio

* Only when HD Radio Tuner/SAT Radio receiver is connected.

3 Rotate the Double Action encoder to select Clock Adjust, and then press /ENTER.

The calendar setting mode is activated.

When the year is set, proceed step 5.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents IDA-X305 Page Contents Operating Instructions Display Setting PrecautionsOperating Instructions On Handling USB Memory Double Action Encoder Operation Turning Power On and Off Adjusting VolumeSetting the Time and Calendar Getting StartedHow to View the Display RadioDisplaying the Calendar/Time Press ViewPresetting Stations Manually Presetting Stations AutomaticallyTuning to Preset Stations Receiving a Multicast Station HD Radio mode onlyChanging the Display HD Radio mode only IPhone/iPodAbout iPhone/iPod usable with this unit Selected program is receivedPlayback Searching for a desired Song/Title10-EN To pause playback, pressSearch Position Memory Up/Down FunctionSkip Function/Percent Skip Function/Alphabet Skip Function 11-ENRandom Play Shuffle Random Play Shuffle AllRepeat Play Changing the DisplayChanger CD screen display example if no CD text exists USB memory/ Portable audio player/Changer13-EN Selecting a Disc Changer Optional Multi-Changer Selection OptionalSelect the desired Folder Folder up/ down MP3/WMA/AAC 14-ENX. Random Play Searching for CD Track Number CD changer only15-EN Press /ENTER during playUSB memory mode About MP3/WMA/AACFile/Folder Name Search Concerning MP3/WMA/AAC 16-ENTerminology 17-ENSound Setting Setting the Bass ControlSetting the Bass Center Frequency Setting the Bass BandwidthSetting the Treble Control Adjusting the High Pass FilterPress to return to normal mode Turning Subwoofer ON/OFFBluetooth Setting Press and hold for 2 seconds to return to normal modeSetting the Bluetooth Connection Bluetooth 20-ENGeneral Setting 21-ENDisplay Setting 22-ENIPhone/iPod Setting HD Radio Setting Only when HD Radio Tuner is connectedAudio Setting 23-ENSAT Radio Receiver Optional 24-ENStoring Channel Presets Receiving Channels with the SAT Radio Receiver OptionalChecking the SAT Radio ID Number Receiving Stored ChannelsCanceling the stored Alert Memory Sirius only Game Alert SetupStoring the desired Song/Artist Sirius only Recalling the stored information Sirius onlySearch Function Select the desired Category Category up/downReceiving Weather or Traffic Information from SAT Radio Instant Replay Function Sirius onlySetting the Auxiliary Data Field Display 28-ENChanging MultEQ mode Adjusting Sound Setting in Manual ModeImprint Operation Optional 29-ENSetting the MX Level Equalizer Presets Factory’s EQSetting the Subwoofer System Setting the Subwoofer PhaseSetting the Filter type Setting the Time Correction UnitSound Field Adjustment 31-EN32-EN Storing and Recalling the Adjusted Contents 33-ENAbout Time Correction Example 1. Listening Position Front Left SeatExample 2. Listening Position All Seats 34-ENSUBW. Mode 3WAY ModeAbout the Crossover 35-ENAbout Imprint 36-ENInformation Case of Difficulty38-EN Indication for CD Changer Indication for SAT Receiver Mode 39-ENSpecifications 40-ENInstallation and Connections 41-ENInstallation 42-ENRemove mounting sleeve from the main unit see Removal on Connections section43-EN Connections 44-EN45-EN Limited Warranty This Warranty does not cover the following

iDA-305 specifications

The Alpine iDA-305 is a cutting-edge car audio receiver designed to enhance your in-car entertainment experience. It embodies a sleek design, combining modern aesthetics with powerful technology, making it an ideal choice for avid music lovers and tech enthusiasts alike.

One of the standout features of the iDA-305 is its advanced digital media receiver abilities. Unlike traditional head units, the iDA-305 does not include a CD player, which allows for a compact design, reducing bulk while focusing on comprehensive connectivity options. Users can enjoy their favorite music through various sources, including USB, auxiliary input, and Bluetooth, making it compatible with numerous devices such as smartphones and tablets.

Bluetooth technology is one of the integral components of the iDA-305. It facilitates hands-free calling, allowing drivers to stay connected without losing focus on the road. Additionally, the dual Bluetooth feature enables simultaneous connections to two devices, allowing you to switch between your phone for calls and another for music seamlessly.

The iDA-305 supports high-resolution audio playback, ensuring that your listening experience is nothing short of exceptional. It is compatible with various audio formats, including MP3, AAC, and WMA, giving users the flexibility to enjoy their music in different file types without compromising quality.

The device boasts an intuitive user interface, featuring a vibrant display that can be adjusted for brightness based on ambient lighting, ensuring readability at all times. The responsive controls allow for easy navigation through your music library and settings, making it user-friendly, even while driving.

Sound customization is easily achievable with the Alpine iDA-305. It offers built-in equalizer settings, allowing users to tailor their audio experience according to their preferences. The digital time correction and crossover features enhance the sound quality, providing a more immersive listening experience.

Furthermore, the iDA-305 is designed to integrate seamlessly with various vehicles. Its compact design means it can fit into most dashboards without modification, ensuring a clean and factory-like appearance. The receiver is compatible with steering wheel controls, providing added convenience for users who want to manage their audio without taking their hands off the wheel.

Overall, the Alpine iDA-305 is a versatile and feature-rich car audio receiver. With its focus on digital media, advanced Bluetooth capabilities, intuitive controls, and customizable sound settings, it is tailored for those who demand quality and functionality in their in-car audio systems.
Top Page Image Contents