JVC GET0137-001A manual Troubleshooting, Symptoms Causes Remedies

ENGLISH

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service center.

		Symptoms	Causes		Remedies
	•	Sound cannot be heard	The volume level is set to the	Adjust it to the optimum level.
		from the speakers.	minimum level.
			Connections are incorrect.	Check the cords and
General				connections.
	•	all.	may have functioned	press		(standby/on/
		This unit does not work at	The built-in microcomputer	While holding SEL (select),
			incorrectly due to noise, etc.	attenuator) for more than
				2 seconds to reset the unit.
				(The clock setting and preset
				stations stored in memory are
				erased.) (See page 2.)
	•	SSM (Strong-station	Signals are too weak.	Store stations manually.
FM/AM		Sequential Memory)
		automatic preset does not
		work.
	•	Static noise while listening	The aerial is not connected	Connect the aerial firmly.
		to the radio.	firmly.
	•	Disc automatically ejects.	Disc is inserted upside down.	Insert the disc correctly.
	•	CD-R/CD-RW cannot be	CD-R/CD-RW is not finalized.	• Insert a finalized CD-R/
		played back.		CD-RW.
	• Tracks on the CD-R/CD-RW			• Finalize the CD-R/CD-RW
		cannot be skipped.		with the component which
				you used for recording.
	•	Disc can be neither played	Disc is locked.	Unlock the disc. (See page 13.)
		back nor ejected.
Playback			The CD player may function	While holding
			incorrectly.	drop the disc when it is ejected.
				(standby/on/attenuator), press
				0 (eject) for more than
				2 seconds. Be careful not to
Disc
	•	Disc sound is sometimes	You are driving on rough	Stop playback while driving on
		interrupted.	roads.	rough roads.
			Disc is scratched.	Change the disc.
			Connections are incorrect.	Check the cords and
				connections.
	•	“NO DISC” appears on the	No disc in the loading slot.	Insert a disc into the loading
		display.		slot.
			Disc is inserted incorrectly.	Insert the disc correctly.

26