JVC GET0087-001A, KD-SX927R manual Maintenance, Handling CDs

Page 38

MAINTENANCE

ENGLISH

Handling CDs

This unit has been designed to reproduce CDs, CD-Rs and CD-RWs.

•You can also play back CD Text.

•This unit is not compatible with MP3.

Moisture condensation

Moisture may condense on the lens inside the unit in the following cases:

•After starting the heater in the car.

•If it becomes very humid inside the car. Should this occur, the unit may malfunction. In this case, eject the disc and leave the unit turned on for a few hours until the moisture evaporates.

How to handle discs

Center holder

When removing a disc from its case, press down the center holder of the case and lift the disc out, holding it by the edges.

•Always hold the disc by

the edges. Do not touch its recording surface.

When storing a disc into its case, gently insert the disc around the center holder (with the printed surface facing up).

•Make sure to store discs into the cases after use.

To keep discs clean

A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge.

When playing a CD-R or CD-RW

You can play back your original CD-Rs or CD-RWs recorded in audio CD format. However, they may not be played back depending on their characteristics or recording conditions.

•User-edited CD-Rs (Recordable) and CD-RWs (Rewritable) can be played back only if they are already “finalized.”

•Before playing back CD-Rs or CD-RWs, read their instructions or cautions carefully.

•Some CD-Rs or CD-RWs may not be played back on this unit because of their disc characteristics, damage or stain on them, or if the player’s lens is dirty.

•CD-Rs or CD-RWs are susceptible to high temperatures or high humidity; so do not leave them inside your car.

•CD-RWs may require a longer readout time. (This is caused by the fact that the reflectance of CD-RWs is lower than for regular CDs.)

To play new discs

New discs may have some rough spots around the inner and outer edges. If such a disc is used, this unit may reject the disc. To remove these rough spots, rub the edges with a pencil or ball-point pen, etc.

About mistracking:

Mistracking may result from driving on extremely rough roads. This does not damage the unit and the disc, but will be annoying.

We recommend that you stop disc playback while driving on such rough roads.

CAUTIONS:

•Do not insert 8 cm discs (single CDs) into the loading slot. (Such discs cannot be ejected.)

•Do not insert any disc of unusual shape—like a heart or flower; otherwise, it will cause a malfunction.

•Do not expose discs to direct sunlight or any heat source or place them in a place subject to high temperature and humidity. Do not leave them in a car.

•Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs.

38

Page 37 Page 39
Image 38
Page 37 Page 39
Contents KD-SX927R GET0087-001A EEHow to reset your unit Position And Reproduction Of LabelsContents Display window Location of the ButtonsControl panel Disp display buttonReturn the battery holder Installing the batteryPlace the battery Remove the battery holderRemote controller RM-RK50To turn off the power Turning on the powerTo drop the volume in a moment Basic OperationsSearching a station automatically Auto search Radio OperationsListening to the radio Start searching a stationSelect the band FM1 3, AM When an FM stereo broadcast is hard to receiveSearching a station manually Manual search FM1 FM2Storing stations in memory FM station automatic preset SSMManual preset Tuning in to a preset station To use Network-Tracking Reception RDS OperationsWhat you can do with RDS Select the desired mode-AF, AF REG or OFF Using TA Standby ReceptionFinish the setting To deactivate the TA Standby Reception, pressUsing PTY Standby Reception PTY indicator disappearsFM station Searching your favourite programmeThan 2 seconds while listening to an Press and hold TP PTY againStation Press and hold TP PTY for more thanSeconds while listening to an FM Select one of the PTY codesChanging the display mode while listening to an FM station Setting the TA volume levelAutomatic clock adjustment PTY codes Open the control panel CD OperationsPlaying a CD Insert a disc into the loading slotTo fast-forward or reverse the track To stop play and eject the discTo go to a particular track directly To go to the next or previous tracksPlaying a CD Text Select text display mode while playing a CD TextTo cancel the prohibition and unlock the disc Prohibiting CD ejectionAdjust the level Sound AdjustmentsAdjusting the sound Select the item you want to adjustPress EQ equalizer while Mode still on the display Selecting preset sound modes C-EQ custom equalizerPress Mode Select the sound mode you wantWhen CEQ Link is set to Link OFF Storing your own sound adjustmentsSelect the sound mode you want to adjust To reset to the factory settings, repeatBasic Procedure Setting the clockChanging the general settings PSM Other Main FunctionsEXT Preferred Setting Mode PSM items24H/12H To set Custom Equalizer Link CEQ Link To select the dimmer mode DimmerTo set the clock display Clock To select the telephone muting TEL To select the scroll mode ScrollTo adjust the auxiliary input level To select the external component to useAttaching the control panel You can detach the control panel when leaving the carDetaching the control panel Select the CD automatic changer CD-CH CD Changer OperationsPlaying CDs CD CD-CHTo play back tracks at random Random Play To go to a particular disc directlyTo show the CD Text information To play back tracks repeatedly Repeat PlayLine External Component OperationsSelect the external component Line in or AUX Rear, press CD CD-CH AUX RepeatedlySelect the DAB band DAB1, DAB2, or DAB3 What is DAB system?Select the DAB tuner Before you startTo tune in to a particular ensemble without searching Storing DAB services in memoryTo restore the FM AM tuner Tuning in to a preset DAB service Select the number 1 6 for the preset DAB service you wantTo use Alternative Reception To adjust the DAB volume levelWhile receiving a DAB service You can keep listening to the same programTroubleshooting Symptoms Causes RemediesMaintenance Handling CDsMW Tuner SpecificationsFM Tuner LW TunerHaving Trouble with operation? Please reset your unit Errata / Опечаткиаа KD-SX927R Removing the unit Уäàëåíèå óñòðîéñòâà CR2025Typical Connections / Тèïè÷íûå ïîäêëþ÷åíèя External component Вíåøíèé êîìïîíåíò JVC AmplifierJVC Amplifier JVC Уñèëèòåëü

GET0087-001A, KD-SX927R specifications

The JVC KD-SX927R is a versatile and feature-rich car stereo that showcases a blend of advanced technology, user-friendly functionality, and impressive audio performance. Known for its sleek design and user interface, this model is perfect for those who seek both capability and aesthetics in their in-car entertainment system.

One of the standout features of the KD-SX927R is its ability to support a variety of audio sources, making it a flexible choice for modern drivers. This unit features compatibility with CD and MP3 playback, allowing users to enjoy their favorite albums and playlists without limitations. Additionally, it supports WMA files, enhancing the listening experience with high-quality sound.

Equipped with a built-in AM/FM tuner, the KD-SX927R offers access to a wide range of radio stations, ensuring that you’re never short of entertainment on the road. The radio includes features like RDS (Radio Data System), which delivers real-time information such as station names and traffic updates, making it an invaluable tool for daily commutes.

Another notable aspect of the KD-SX927R is its enhanced connectivity features. It includes a USB port, allowing for easy connection of compatible devices such as smartphones and USB flash drives. This connection supports various audio formats, facilitating seamless playback of your music collection. Moreover, the unit features an auxiliary input, perfect for connecting external devices, providing further versatility in audio playback options.

Sound quality is paramount in the KD-SX927R design, featuring a powerful built-in amplifier that delivers clear and dynamic audio.Furthermore, it includes a 3-band equalizer, allowing users to customize the sound to their preferences. This means you can boost bass or treble frequencies to achieve the perfect sound profile tailored to your liking.

The JVC KD-SX927R’s user interface is designed to simplify operation with an easy-to-read display and intuitive controls, enhancing the overall user experience. With RCA pre-outs, it can also be easily integrated with additional amplifiers and subwoofers for those looking to elevate their car audio system.

In conclusion, the JVC KD-SX927R car stereo stands out for its versatility, audio quality, and modern connectivity options. Whether you’re a casual listener or a dedicated audiophile, this unit has the features necessary to provide an exceptional auditory experience on the go.
Top Page Image Contents