| BASIC OPERATIONS |
1 3 | 2 |
ENGLISH
Turning on the power
1 Turn on the power.
Note on
When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power.
2 Select the source.
To operate the tuner (FM or AM), see pages 9 – 12.
To play a tape,
see pages 13 – 15.
To operate the CD changer, see pages 21 – 24.
To operate the external component (LINE IN), see page 25.
3 Adjust the volume.
To increase the volume
To decrease the volume
Volume (or audio) level indicator (see page 19)
Volume level appears.
4 Adjust the sound as you want. (See pages 16 and 17.)
To drop the volume in a moment
Press briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
•If you turn the control dial, you can also restore the sound.
To turn off the power
Press and hold for more than one second.
“SEE YOU” appears, then the unit turns off.
7