JVC GET0260-015A manual Canceling the display Demonstrations, Setting the clock

Canceling the display

demonstrations

If no operations are done for about 20 seconds, display demonstration starts.

[Initial: DEMO ON]—see page 16.

1

3

4Finish the procedure.

To activate the display demonstration

In step 3 above...

Setting the clock

1

2Set the hour, minute, and clock

system.

1Select “CLOCK H” (hour), then adjust the hour.

2Select “CLOCK M” (minute), then adjust the minute.

3Select “24H/12H,” then select “24H” (hour) or “12H” (hour).

3Finish the procedure.

To check the current clock time when the power is turned off

7