JVC KD-G614, GET0305-001A, KD-G514 manual Maintenance

Page 25

Maintenance

How to clean the connectors

Frequent detachment will deteriorate the connectors.

To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.

Connector

Moisture condensation

Moisture may condense on the lens inside the CD player in the following cases:

After starting the heater in the car.

If it becomes very humid inside the car. Should this occur, the CD player may malfunction. In this case, eject the disc and leave the receiver turned on for a few hours until the moisture evaporates.

How to handle discs

When removing a disc from Center holder

To keep discs clean

A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge.

Do not use any solvent (for

example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs.

To play new discs

New discs may have some rough spots around the inner and outer edges. If such a disc is used, this receiver may reject the disc.

To remove these rough spots, rub the edges with a pencil or ball-point pen, etc.

its case, press down the center holder of the case and lift the disc out, holding it by the edges.

• Always hold the disc by the edges. Do not touch its recording surface.

When storing a disc into its case, gently insert the disc around the center holder (with the printed surface facing up).

Make sure to store discs into the cases after use.

Do not use the following discs:

Warped

Sticker

Sticker

 

Stick-on

 

residue

Disc

label

disc

 

 

 

 

 

25

Image 25
Contents KD-G614/KD-G514 How to reset your unit How to forcibly eject a discContents How to use the M Mode button How to read this manualParts identification Control panel KD-G614/KD-G514Display window Installing the lithium coin battery CR2025 Remote controller RM-RK50To turn off the power To drop the volume in a moment ATTGetting started Basic operationsSetting the clock Canceling the display DemonstrationsTo activate the display demonstration Listening to the radio Radio operationsTo tune in to a station manually FM station automatic presetting When an FM stereo broadcast is hard to receiveStoring stations in memory SSM Strong-station Sequential MemoryManual presetting Listening to a preset stationPlaying a disc in the receiver Disc operationsAbout MP3 and WMA discs To stop play and eject the discAbout the CD changer Playing discs in the CD changerTo go to the next or previous tracks To fast-forward or reverse the trackProhibiting disc ejection Other main functionsSkipping a track quickly during play While playing an audio CD or a CD Text Changing the display informationWhile playing an MP3 / or WMA disc Mode Plays at random Mode Plays repeatedlySelecting the playback modes Selecting preset sound modes C-EQ custom equalizer Sound adjustmentsFor Preset values To do Range Adjusting the soundBasic procedure General settings PSMTEL*1 Indications Selectable settings, referenceAssigning titles to the sources Other main functionsSources CharactersDetaching the control panel Attaching the control panelPlaying an external component External component operationsMaintenance More about this receiver Playing an MP3/WMA disc General settings-PSMChanging the source Ejecting a discSymptoms Causes Remedies TroubleshootingMP3/WMA playback CD changer Audio Amplifier Section SpecificationsHaving Trouble with operation? Refer to page of How to reset your unitInstallation/Connection Manual Connecting the external components Connecting the external amplifiersTypical Connections