Cautions
Before using this unit, be sure to read the applicable items of the operating instructions and these
Afterwards keep them handy for future reference. Take special care to follow the warnings indicated on the unit itself as well as in the operating instructions.
Safety
1.Care of battery charger - Never take hold of the battery charger if your hand is wet, and always grasp the plug body when connecting or disconnecting it.
2.Nonuse Periods - When not in use, be sure to disconnect the battery charger from the AC power outlet.
3.Batteries - If the set is not used for a long period of time, remove all the batteries to prevent potential damage due to possible battery leakage. Do not mix batteries (old and new ) or different types of batteries.
Installation
Placement
1.Foreign Material - Care should be taken so that objects do not fall into and liquids are not spilled into the unit. Do not subject this unit to excessive smoke, dust, mechanical vibration, or shock.
2.Magnetism - The unit should be situated away from equipment or devices that generate strong magnetic fields.
3.Stacking - Do not place any objects, on top of the unit.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
This main unit is resistant to spray.
However, this function is inactive in any of the following condition.
•When the cap on the headphones is removed.
•When the card cover or the battery compartment cover is open. In case the unit is moistened, wipe it with a soft, dry cloth before reusing it. Also take care of the following points.
•Do not leave the unit under high humidity, for example in a bathroom.
•Keep the unit away from direct moistening by tap water etc.
•Do not change the SD memory card or batteries with wet hands. (Otherwise, the water drop may fall from your hand and penetrate inside the unit.)
THE FOLLOWING PHRASES ARE APPLIED ONLY FOR U.S.A.:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION!
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.
Precautions on the unit and SD memory card
To prevent malfunction, do not leave the unit and/or SD memory card in the following locations.
•In a closed automobile (particularly in the summer).
•In a place with high humidity, for example in a bathroom
•In a place with excessive dust.
•In a place subject to direct sunlight or near heating equipment.
•In a place exposed to corrosive gas, etc.
Also avoid the following:
•Disassembly or modification.
•Strong impact, dropping or moistening with rainwater.
•Inserting an object other than an SD memory card into the card insertion slot.
•Using a cracked or deformed SD memory card.
•Applying excessive force when opening the battery compartment cover or card cover.
•Removing the label on SD memory card or attaching another label or sticker on the existing label.
•When the unit is moistened by water, water drops may penetrate the SD memory card insertion slot or behind the card cover. When the unit is moistened, hold it so that the card insertion slot faces downward, open the card cover and wipe off water drops well before inserting or removing the SD memory card. Also be sure to wipe water drops around and inside the headphones jack.
To protect recorded data
•Set the write protect switch on the SD memory card to "LOCK". Do not unlock this switch until the next time you check out (record) or edit the data in the card.
•Do not touch the metallic terminals of the SD memory card with a bare hand or metallic object.
Write |
| |
protect | LOCK | |
switch | ||
|
64MB