Messages
Troubleshooting Guide
NO CARD
NOT SD CARD
NOT SD AUDIO
NO PLAYLIST
No SD memory card is inserted. The SD card is not inserted firmly.
A card other than SD memory card is inserted.
The SD memory card does not contain recording of SD audio data.
No play list has been created.
Before requesting service for this unit, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the directory of Authorized Service Centers (enclosed with this unit) to locate a convenient service center, or consult your dealer for instructions.
NO TITLE
NO INFO
NO TRACK
UNFORMAT
ILLEGAL FORM
The track and play list are not titled.
The artist information is not recorded.
The play list contains no recording (check- out) at all.
The SD memory card is not formatted.
The data format is other than specified.
Problem
Cannot play
Cannot hear music
Check this
•Is the unit set to the hold mode?
•Is the SD memory card inserted?
•Are batteries exhausted? (If they are not, remove and insert them again.)
•Is the volume too low?
•Does the selected play list contain no
•Is the headphone plug inserted completely into the jack? (Unplug then plug in again.)
•Is the headphone plug dirty?
LOCKED
NOT PLAY
NOT DISPLAY
NOT SUPPORT
U01
ERROR
The inserted SD memory card is unusable.
The data is not in the AAC or MP3 data. (Displayed in playback)
The character data are not displayable.
The data is other than AAC or MP3 data. (Displayed in the bit rate screen)
The battery power is too low to turn the unit on.
There is an error. If it cannot be recovered by removing then inserting the card or by turning the unit off then to on again, remove and insert the batteries.
Tracks on SD card | • | Is random playback activated? |
do not play in order | • | Is a playlist selected? |
Too noisy. | • Is the unit placed near a TV or cellular | |
phone? | ||
|
Note
This unit provides versatile operations under the microcomputer control. If the unit cannot be operated properly by pressing any button, remove the batteries and insert them again.
Maintenance
Maintenance of the unit
When the unit gets dirty, wipe with a soft, dry cloth. If it is contaminated seriously, clean with a cloth slightly moistened with light neutral detergent solution then wipe dry with a soft, dry cloth.
•Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine.
•When you want to use a chemical cloth for cleaning, be sure to read carefully and observe its cautions and notes.
Note
This unit is a precision instrument. Do not subject it to a strong impact by hitting or dropping it. Otherwise, the SD memory card may be unlocked or the unit may fail.