JVC LVT1055-001A manual Setting the clock, Adjust the hour, Select Off, Set the minute

Canceling the display demonstration

When shipped from the factory, display demonstration has been activated, and starts automatically when no operations are done for about 20 seconds.

•It is recommended to cancel the demonstration before you use the unit for the first time.

To cancel the display demonstration, follow

the procedure below:

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see page 51.)

SEL

2 Press number button 1 to select “MOVIE”—Movie category of the PSM settings.

To activate the display demonstration, repeat the same procedure and select “All Demo” or “Int Demo” in step 3.

•For more details, see “To set the movie demonstration—Graphics” on page 52.

Setting the clock

You can also set the clock system to 24 hours or 12 hours.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see page 51.)

SEL

2 Press number button 2 to select “CLOCK”—Clock category of the PSM settings.

ENGLISH

1 2 3 4 5 6

1 2 3 4 5 6

The “Clock Hr” setting screen appears on

	the display.
The “Graphics” setting screen appears on	3 Adjust the hour.
the display.

3 Select “Off.”

ATT

		4 Set the minute.
ATT
		1 Select “Clock Min (minute).”
4 Finish the setting.
		2 Adjust the minute.
	1		2

SEL

ATT

CONTINUED ON THE NEXT PAGE

9