RADIO OPERATIONS
ENGLISH
Listening to the radio
You can use either automatic searching or manual searching to tune in to a particular station.
Searching for a station automatically: Auto search
1 Select the band (FM1, FM2, FM3 or AM).
Note:
This receiver has three FM bands (FM1, FM2, and FM3). You can use any one of them to listen to an FM broadcast.
Selected band appears.
2 Start searching for a station.
To search for stations of higher frequencies, press ¢
briefly.
To search for stations of lower frequencies, press 4
briefly.
When a station is received, searching stops.
ST indicator lights up when receiving an FM broadcast in stereo.
6
To stop searching before a station is received,
press the same button you have pressed for searching.
Searching for a station manually: Manual search
1 Select the band (FM1, FM2, FM3, or AM).
2 Press and hold ¢
or 4
until “M” (manual) starts flashing on the display.
3 Tune in to a station you want while “M” is flashing.
To tune in to stations of higher frequencies
To tune in to stations of lower frequencies