TAPE OPERATIONS
Listening to a tape
You can play back type I (normal) tapes.
1 Insert a cassette into the cassette compartment.
The unit turns on and tape play starts automatically (ÒLOADINGÓ flashes on the display).
ENGLISH
2 Select the tape direction.
Each time you press the button,
the tape direction changes alternately.
To stop play and eject the cassette
Press Tape 0.
Tape play stops and the cassette automatically ejects from the cassette compartment (ÒEJECTÓ flashes on the display).
When one side of the tape reaches its end during play, the other side of the tape automatically starts playing. (Auto Reverse)
Note on
When a cassette is already in the cassette compartment, pressing TAPE (PROG) turns on the unit and starts tape play automatically.
Notes:
•If you change the source, the tape play also stops (without ejecting the cassette this time).
•You can also eject the cassette by pressing Tape 0 with the ignition key turned off. (However, you cannot load the cassette into the cassette compartment when the ignition key is turned off.)
11