Chapter 3. Error Code to FRU Index
The Error Code to FRU Index lists error symptoms and possible causes. The most likely cause is listed first. Use this index to help you decide which FRUs to replace when you are servicing the system.
If the codes in the following tables indicate a device which is present more than once in the server, a location code is needed to specify which device generated the error. Go to “Step
log and obtain a location code. Location code descriptions can be found under Chapter 4, “Location Codes” on page
Once you have the location code, see Chapter 8, “Parts Information” on page
Notes:
1.If more than eight digits are displayed in the operator panel, use only the first eight digits to find the error in the tables. The digits that display beyond the first eight digits are location codes that can assist you in diagnosing the problem.
See Chapter 4, “Location Codes” on page
2.Licensed programs frequently rely on network configuration and system information stored on the VPD on the operator panel. If the MAPs indicate that the operator panel should be replaced, swap the VPD from the old operator panel to the new one. If the old VPD module has to be replaced, call technical support for recovery instructions. If recovery is not possible, notify the system owner that new keys for licensed programs may be required.
If you replace FRUs and the problem is still unresolved, go to “Step
problem has been resolved, go to "MAP 0410: Repair Checkout " in theDiagnostics Information for Multiple Bus Systems, unless otherwise indicated in the tables.
Error Code | Function | Repair Action/Possible Failing FRU |
| /Description |
|
|
|
|
20A80xxx | Remote Initial |
|
| program load |
|
| (RIPL) errors |
|
|
|
|
20A80000 | Insufficient | Verify the IP address. |
| information to boot. |
|
|
|
|
20A80001 | Client IP address is | Change IP address. |
| already in use by |
|
| another network |
|
| device. |
|
|
|
|
Chapter 3. Error Code to FRU Index |
