Front Covers

Removal

Note: It is not necessary to remove the server from the rack to remove the front covers unless a removal procedure requires the top cover to be removed.

1.If required by the step that sent you here, remove the top cover as described in “Removing the Cover” on page 7-3.

2.Remove the thumbscrew from the disk drive bay cover and pivot it away from the system, as shown in the following illustration:

3.Push the left side of the media cover to the right, and carefully pull the cover forward and away from the system, as shown in the following illustration:

Replacement

Replace in the reverse order.

Chapter 7. Removal and Replacement Procedures

7-17

Page 161
Image 161
IBM B50 manual Front Covers Removal