IBM B50 manual Name, Location Physical Logical Code Connection Identification

1-C1.1Identifies CPU 1 on CPU card 1 on planar 1.

P2/Z1-A3.1Identifies a SCSI device with a SCSI address of LUN 1 at SCSI ID 3 attached to SCSI bus 1 from planar 2.

P1-I2#E3.2Identifies the second cable in a series of cables attached to Ethernet controller 3 in slot 2 (I2) on planar 1.

Depending on the AIX and firmware levels, AIX Diagnostics may include extended location information when identifing a planar or card. The extended location information is always included when identifing a cable or connector. Location codes with extended location information that display without a description identifing the devices, always identify the cable attached to the port.

Name	AIX	Location	Physical	Logical
	Location	Code	Connection	Identification
	Code
System Planar	00-00	P1
Riser Card		P1.1	J39
Memory DIMM 1	00-00	P1-M1	J11
Memory DIMM 2	00-00	P1-M2	J28
Memory DIMM 3	00-00	P1-M3	J19
Memory DIMM 4	00-00	P1-M4	J139
Diskette Drive	01-D1-00-00	P1-D1	J16	Base Address
				0x03F0
Keyboard	01-K1-00-00	P1-K1	J59	Base Address
				0x0060
Mouse	01-K1-01-00	P1-O1	J56	Base Address
				0x0060
Audio Port	01-Q2	P1/Q2
Diskette Port	01-D1	P1/D1	J16	Base Address
				0x03F0
Keyboard Port	01-K1-00	P1/K1	J59	Base Address
				0x0060
Mouse Port	01-K1-01	P1/O1	J56	Base Address
				0x0060
Serial Port 1	01-S1	P1/S1	J24	Base Address
				0x03F8
Serial Port 2	01-S2	P1/S2	J23	Base Address
				0x02F8
Parallel Port	01-R1	P1/R1	J49	Base Address
				0x0378
Ethernet Port	10-60	P1/E1	J45	Host Bridge ID00,
				Device 12

4-27046 Model B50 Service Guide