After determining which adapter to use to ping the remote system, you must provide the addresses needed to communicate with the remote system. Select the appropriate device from the Ping menu to display a screen similar to the following:
Ping |
|
|
|
|
1. | Client IP | Address | [129.132.4.2 | |
2. | Server | IP | Address | [129.132.4.1 |
3. | Gateway IP Address | [129.132.4.3 | ||
4. | Subnet | Mask | [255.255.255. | |
. | . | ||
E=Execute | X=Exit | ||
' | ' | ||
===>
Change SCSI ID
This option allows you to view and change the addresses of the SCSI controllers attached to you server.
Update System Firmware
This option allows you to update your system firmware. Note that you must insert a diskette containing the firmware update image after you see a confirmation screen.
To create a firmware diskette with the latest level of firmware available, see the following Web site:
http://www.rs6
When you are prompted, insert the firmware update diskette containing the new firmware image.
Chapter 6. Using System Management Services |
