IBM B50 manual E6FF

Checkpoint	Description	Repair Action
(hex)
E602	SSA PCI adapter	1.	Replace the adapter.
	open firmware has	2.	See “Unresolved problems” on page 3-26
	started.
E603	SSA PCI adapter	1.	Replace the adapter.
	BIST has completed	2.	See “Unresolved problems” on page 3-26
	with an error.
E604	SSA PCI adapter	1.	Replace the adapter.
	BIST and	2.	See “Unresolved problems” on page 3-26
	subsequent POSTs
	have completed
	successfully.
E605	SSA PCI adapter	1.	Replace the adapter.
	BIST has completed	2.	See “Unresolved problems” on page 3-26
	successfully but the
	subsequent POSTs
	have failed.
E60E	SSA PCI adapter	1.	Replace the adapter.
	open firmware about	2.	See “Unresolved problems” on page 3-26
	to exit (no stack
	corruption)
E60F	SSA PCI adapter	1.	Replace the adapter.
	open firmware has	2.	See “Unresolved problems” on page 3-26
	run unsuccessfully.
E6FF	SSA PCI adapter	1.	Replace the adapter.
	open firmware about	2.	See “Unresolved problems” on page 3-26
	to exit ( with stack
	corruption ).

Unresolved problems:Go to “MAP 1540: Minimum Configuration” on page

2-17for any of the following conditions:

A 4-digit code in the range of “E100” through “EFFF” is displayed on the operator panel display but is not listed in the table that lists firmware checkpoints on page 3-14.

A 4-digit code is displayed and is listed in the table that lists firmware

checkpoints on page 3-14,but there are no repair actions or FRUs listed for the code.

All of the FRUs listed in repair actions have been replaced, and the problem has not been corrected.

3-267046 Model B50 Service Guide