
SRN |
| Bus ID | Possible Failing Device and | Associated FRU |
|
|
| AIX Location Code |
|
|
|
|
|
|
|
|
| Tablet port/device | system board (see note 3 on |
|
|
|
| page |
|
|
|
| this table). |
Note: | If a network adapter or the system board is replaced, the network administrator must be |
notified so that the client IP addresses used by the server can be changed. In addition, the operating system configuration of the network controller may need to be changed in order to enable system startup. Also check to ensure that any client or server that addresses this system is updated.
Memory PD Bits
The following table expands the firmware error code25Cyyrrr on page
yyis the PD value listed in the following table. Use these values to identify the type of memory that generated the error.
If you replace FRUs and the problem is still not corrected, go to MAP 0030 in the Diagnostics Information for Multiple Bus Systems unless otherwise indicated in the tables.
PD Value | Size | Speed (nsecs) | Parity/ECC |
|
|
|
|
58 | 34MB | 10 | ECC |
|
|
|
|
38 | 128MB | 10 | ECC |
|
|
|
|
Chapter 3. Error Code to FRU Index |