Activity LED and Cable Assemblies

Removal

1.If you have not already done so, remove the cover as described in “Removing the Cover” on page 7-3.

2.Remove the front covers as described in “Front Covers” on page 7-17.

3.To remove either activity LED and cable, press the LED (A in the following illustration) into the chassis from the front, and pull the LED and cable from behind the front of the chassis.

A

4. Disconnect the cable from the system board.

Replacement

Replace in the reverse order.

7-207046 Model B50 Service Guide

Page 164
Image 164
IBM B50 manual Activity LED and Cable Assemblies Removal