USB device playback
Bluetooth*2
Symptom | Remedy/Cause |
• “CANNOT PLAY” flashes on the | • Attach a USB device that contains tracks encoded |
display. | in an appropriate format. |
•“NO USB” appears on the display. • Reattach the USB device again.
•The unit cannot detect the USB device.
While playing a track, sound is | The MP3/WMA tracks have not been properly |
| |
sometimes interrupted. | copied into the USB device. |
| |
| Copy MP3/WMA tracks again into the USB device, | ||
| and try again. |
|
|
|
|
| |
Correct characters are not | This unit can only display letters (upper case), |
| |
displayed (e.g. album name). | numbers, and a limited number of symbols. ( | 9) | |
Bluetooth device does not detect | The unit can be connected with one Bluetooth |
| |
the unit. | mobile phone and one Bluetooth audio device at a | ||
| time. |
|
|
| While connecting a device, this unit cannot be |
| |
| detected from another device. Disconnect currently | ||
| connected device and search again. |
| |
|
|
| |
The unit does not detect the | • Check the Bluetooth setting of the device. |
| |
Bluetooth device. | • Search from the Bluetooth device. After the device | ||
| detects the unit, select “OPEN” on the unit to |
| |
| connect the device. ( | 13) |
|
|
|
| |
The unit does not make pairing | • Enter the same PIN code for both the unit and |
| |
with the Bluetooth device. | target device. |
|
|
•Select the device name from “SPECIAL,” then try to connect again. ( 14)
•Try to pair/connect from the Bluetooth device.
Echo or noise occurs. | Adjust the microphone unit position. |
Phone sound quality is poor. | • Reduce the distance between the unit and the |
| Bluetooth mobile phone. |
| • Move the car to a place where you can get a better |
| signal reception. |
|
|
The connected audio device | Check whether the connected audio device supports |
cannot be controlled. | AVRCP (Audio/Video Remote Control Profile). |
|
|
The sound is interrupted or | • Reduce the distance between the unit and the |
skipped during playback of a | Bluetooth audio device. |
Bluetooth audio device. | • Disconnect the device connected for |
| • Turn off, then turn on the unit. |
| • Connect the Bluetooth audio device again, when |
| the sound is not yet restored. |
*2 For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.
34
ENGLISH