Troubleshooting
Symptom
Remedy/Cause
General
No sound, sound interrupted or | Check the cords, antenna and cable connections. | |
static noise. | Check the condition of the disc, connected device and | |
| recorded tracks. |
|
“MISWIRING CHK WIRING THEN | Ensure the terminals of the speaker leads are properly insulated | |
RESET UNIT”/“WARNING CHK | with tape before resetting the unit. ( | page 3) |
WIRING THEN RESET UNIT” | If the message does not disappear, consult your JVC car audio | |
appears on the display and no | dealer or kits supplying company. |
|
operations can be done. |
|
|
The unit does not work at all. | Reset the unit. ( page 3) |
|
Source cannot be selected. | Check the <SRC SELECT> setting. ( | page 15) |
The correct characters are not | This unit can only display letters (upper case), numbers, and a | |
displayed (e.g. album name). | limited number of symbols. |
|
FM/AM
SSM automatic presetting does not work.
Store stations manually.
CD/USB/iPod/iPhone
“PLEASE” and “EJECT” appear | Press [], then insert the disc correctly. |
alternately on the display. |
|
“IN DISC” appears on the display. | The disc cannot be ejected properly. Make sure nothing is |
| blocking the loading slot. |
“READING” keeps flashing on the | A longer readout time is required. Do not use too many |
display. | hierarchical levels and folders. |
| Reload the disc or reattach the USB device. |
Tracks/folders are not played | The playback order is determined by the file name (USB) or the |
back in the order you have | order in which files were recorded (disc). |
intended. |
|
The elapsed playing time is not | This sometimes occurs during playback. This is caused by how |
correct. | the tracks are recorded on the disc. |
“NOT SUPPORT” appears on the | Check whether the track is a playable file format. |
display and track skips. |
|
“CANNOT PLAY” flashes on Check whether the connected device is compatible with this
the display. | unit. (USB: page 19) (iPod/iPhone: page 17) |
The unit cannot detect the Ensure that the device contains files in the supported
|
| connected device. | formats. ( | page 16) |
|
|
| Reattach the device. | |
| The iPod/iPhone does not turn | Check the connection between this unit and iPod/iPhone. | ||
| on or does not work. *1 | Detach and reset the iPod/iPhone using hard reset. For | ||
|
|
| details on resetting the iPod/iPhone, refer to the instruction | |
|
|
| manual supplied with the iPod/iPhone. | |
|
|
| Check whether <IPOD SWITCH> setting is appropriate. | |
|
|
| ( page 8) |
|
| ® *2 | “CANNOT SKIP” | The skip limit has been reached. | |
| “NO STATION” | No registered station in your iPod/iPhone. | ||
| Pandora |
|
|
|
| “NO ACTIVE STATION” | No active station. | ||
|
| |||
|
| “SET UP PANDORA ON YOUR | Pandora® setup is not completed. Connect the iPod/iPhone to | |
|
| DEVICE” | this unit after completing the setup in your iPod/iPhone. | |
| *1 | For | *2 For | |