Alpine TDM-9505RB, TDM-9501RM, TDM-9503R owner manual Installation and Connections, Precautions

Page 23

Installation and Connections

Before installing or connecting the unit, please read the following and pages 2 and 3 of this manual thoroughly for proper use.

WARNING

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL

Failure to do so may result in electric shock or injury due to electrical shorts.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.

Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire's insulation from being cut by the metal edge of the hole.

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.

The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR SHIFT LEVER.

Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or product damage.

CAUTION

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.

Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.

20-EN

Precautions

•Be sure to disconnect the negative cable from the (–) pole of the battery before connecting your TDM- 9505RB/TDM-9503R/TDM-9501RM/TDM-9501R to avoid short circuits.

•Use the correct ampere rating when replacing fuses. Failure to do so may result in fire or electric shock.

•Be sure to connect the leads correctly according to the diagram. Otherwise malfunctioning of the unit and/or damage to the vehicle may occur.

•Be sure to connect the speaker (–) leads to the speaker

(–) terminal. Never connect left and right channel speaker cables to each other or to the vehicle body.

•Use only vehicles with a 12 volt negative (–) ground. Check with your dealer if you are not sure. Failure to do so may result in fire or electric shock.

•You must be very careful when connecting wires to the vehicle's electrical system. Be sure you do not use leads of factory installed components (like an on-board computer). When connecting TDM-9505RB/TDM- 9503R/TDM-9501RM/TDM-9501R to the fuse box, make sure the fuse for the intended circuit of the TDM- 9505RB/TDM-9503R/TDM-9501RM/TDM-9501R has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your ALPINE dealer.

•The TDM-9505RB/TDM-9503R/TDM-9501RM/TDM- 9501R uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connections. You may need an adaptor to connect other units. If so, please contact your authorized ALPINE dealer for assistance.

IMPORTANT

Please record the serial number of your unit in the space provided below and keep it as a permanent record. The serial number plate is located on the bottom of the unit.

SERIAL NUMBER:

INSTALLATION DATE:

INSTALLATION TECHNICIAN:

PLACE OF PURCHASE:

Page 22 Page 24
Image 23
Page 22 Page 24
Contents TDM-9505RB TDM-9503R TDM-9501RM TDM-9505RB TDM-9503R TDM-9501RM Alpine CD Changers Give You More Contents Do not Disassemble or Alter Halt USE Immediately if a Problem AppearsHandling the Detachable Front Panel Attaching the Front Panel ∙ Connectable to Remote Control Interface BoxBasic Operation Detaching the Front PanelTreb VOL Bass Turning Power On and OffAdjusting Source Signal Levels Turning Loudness On/OffRadio Operation Manual TuningAutomatic Seek Tuning Manual Storing of Station PresetsTuning to Preset Stations Automatic Memory of Station PresetsRDS Operation Setting RDS Reception Mode and Receiving RDS StationsRecalling Preset RDS Stations When the RDS station signal received has become weak→ Light M ↔ Classics ↔ Other M ← PTY Programme Type TuningReceiving Traffic Information Receiving Traffic Information While Playing Tape or RadioReceiving RDS Regional Local Stations Priority NewsNormal Play and Pause Cassette Player OperationInserting/Ejecting Cassette Repeat PlayProgramme Sensor P.S Fast Forward and RewindScanning Programmes Manual ReverseFast Forward and Backward CD Changer OperationControlling CD Changer Optional Music Sensor M.S. Skip X. Random Play Repeat Play on Single Track or Entire DiscTo Display CD Titles TDM-9505RB/TDM-9503R only Remote Control Operation Battery Replacement Case of Difficulty InformationSpecifications Precautions Installation and ConnectionsJapanese CAR InstallationRemoval Speakers ConnectionsTo prevent external noise from entering the audio system Audio Interrupt In Lead Pink/BlackPage Händlerstemple GERÄTE-PASS

TDM-9501R, TDM-9503R, TDM-9501RM, TDM-9505RB specifications

Alpine is renowned for its commitment to superior audio quality, and its TDM series, including the TDM-9505RB, TDM-9501RM, TDM-9501R, and TDM-9503R, exemplifies this dedication. Each of these models boasts an array of features designed to enhance the listening experience, showcasing cutting-edge technology tailored for modern audio needs.

The TDM-9505RB stands out with its advanced digital media receiver, which supports a wide range of audio formats, delivering crisp and clear sound. With Bluetooth connectivity, users can easily stream their favorite music from smartphones or tablets, while the built-in microphone facilitates hands-free calling. This model also integrates seamlessly with the latest smartphone applications, providing effortless access to navigation and music streaming services.

In comparison, the TDM-9501RM presents a sleek design coupled with high-resolution audio playback capabilities. It emphasizes user-friendly controls that allow for easy navigation through playlists and settings. The seven-band graphic equalizer offers customizable sound adjustments, ensuring a tailored listening experience. Its multi-device compatibility means it can connect with various sources, from traditional CD players to modern digital devices.

The TDM-9501R model focuses on robust connectivity options, featuring multiple USB ports and an auxiliary input that expands compatibility with different audio sources. This model also incorporates Alpine’s patented sound enhancement technologies, such as Dynamic Bass Enhancer, which ensures that bass frequencies are rich and powerful without distortion. Furthermore, the user can access various sound modes, allowing listeners to switch between settings for music, movies, or podcasts.

Lastly, the TDM-9503R combines functionality with versatility. This model includes a dual-zone output that allows for tailored audio experiences in separate cabin areas, perfect for larger vehicles. It also features a built-in digital signal processor (DSP) to optimize sound quality across diverse environments. The high-powered amplifier connected with high-impedance speakers ensures that sound is both loud and clear.

Together, the TDM series from Alpine revolutionizes audio performance in vehicles, providing customers with unmatched flexibility, connectivity, and sound quality. Whether for casual listening or for audiophiles seeking perfection, these models cater to all audio preferences with innovative technologies and robust features.
Top Page Image Contents