Alpine TDM-9505RB Turning Power On and Off, Adjusting Source Signal Levels, Treb VOL Bass

Page 8

Turning Power On and Off

1 Press the POWER button to turn on the unit.

NOTE

The unit can be turned on by pressing any other button except the eject c button.

The volume level gradually increases to the previous level you were listening to before the unit was turned off.

Press the POWER button again to turn off the unit.

NOTE

When the power is turned on for the very first time after the unit is connected to the vehicle's battery, the unit produces sound with the volume level 12, loudness on in the tuner mode.

Non Fading Pre-out (N.F.P.) On and Off (TDM-9505RB/TDM-9503R only)

1 Press and hold the Eject (c) button for at least 3 seconds.

With each press, N.F.P. is toggled On or Off.

N.F.P. ON:

In this position, the Pre-Output on the TDM- 9505RB/TDM-9503R will not be affected by the fader. This is ideal for driving a subwoofer amplifier.

N.F.P. OFF:

Returns to normal fader mode.

NOTES

∙Initial mode is N.F.P. OFF.

∙Set the N.F.P. to OFF unless the subwoofer is used.

Adjusting Source Signal Levels

If the difference in volume level between the tape player and FM radio is too great, adjust the FM signal level as follows.

1 Press and hold the SETUP button for at least 3 seconds.

2 Press the Preset 1 button to select the FM signal level HI (High) or LO (Low) to make the signal levels between the FM band and tape player closer.

Each press toggles between FM-LV HI and FM- LV LO.

3 Press the SETUP button to cancel the adjusting mode.

Adjusting Volume/Bass/Treble/

Balance (Between Left and Right

Channels)/Fader (Between Front

and Rear Speakers)

1 Press the MODE button repeatedly to choose the desired mode.

Each press changes the modes as follows:

→

 

→

 

 

→

 

 

 

 

 

TREB

 

 

VOL

BASS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FAD ←

 

BAL ←

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE

If the or button is not pressed in 5 seconds after selecting the BASS, TREBLE, BALANCE and FADER modes, the unit automatically sets in the VOLUME mode.

2 Press the and buttons until the desired sound is obtained in each mode.

NOTE

The settings of the Bass and Treble will be individually memorized for each source (FM, MW, LW, Tape and CD Changer) until the setting is changed.

Depending on the connected devices, some functions and display indications do not work.

Turning Loudness On/Off

1 Press and hold the LOUD button for at least

2 seconds to activate or deactivate the loudness mode. The display shows "LD" when the loudness mode is activated.

5-EN

Page 7 Page 9
Image 8
Page 7 Page 9
Contents TDM-9505RB TDM-9503R TDM-9501RM TDM-9505RB TDM-9503R TDM-9501RM Alpine CD Changers Give You More Contents Halt USE Immediately if a Problem Appears Do not Disassemble or AlterHandling the Detachable Front Panel ∙ Connectable to Remote Control Interface Box Basic OperationDetaching the Front Panel Attaching the Front PanelTurning Power On and Off Adjusting Source Signal LevelsTurning Loudness On/Off Treb VOL BassManual Tuning Automatic Seek TuningManual Storing of Station Presets Radio OperationAutomatic Memory of Station Presets Tuning to Preset StationsSetting RDS Reception Mode and Receiving RDS Stations Recalling Preset RDS StationsWhen the RDS station signal received has become weak RDS OperationPTY Programme Type Tuning Receiving Traffic InformationReceiving Traffic Information While Playing Tape or Radio → Light M ↔ Classics ↔ Other M ←Priority News Receiving RDS Regional Local StationsCassette Player Operation Inserting/Ejecting CassetteRepeat Play Normal Play and PauseFast Forward and Rewind Scanning ProgrammesManual Reverse Programme Sensor P.SFast Forward and Backward CD Changer OperationControlling CD Changer Optional Music Sensor M.S. Skip Repeat Play on Single Track or Entire Disc X. Random PlayTo Display CD Titles TDM-9505RB/TDM-9503R only Remote Control Operation Battery Replacement Information Case of DifficultySpecifications Installation and Connections PrecautionsJapanese CAR InstallationRemoval Connections SpeakersAudio Interrupt In Lead Pink/Black To prevent external noise from entering the audio systemPage Händlerstemple GERÄTE-PASS

TDM-9501R, TDM-9503R, TDM-9501RM, TDM-9505RB specifications

Alpine is renowned for its commitment to superior audio quality, and its TDM series, including the TDM-9505RB, TDM-9501RM, TDM-9501R, and TDM-9503R, exemplifies this dedication. Each of these models boasts an array of features designed to enhance the listening experience, showcasing cutting-edge technology tailored for modern audio needs.

The TDM-9505RB stands out with its advanced digital media receiver, which supports a wide range of audio formats, delivering crisp and clear sound. With Bluetooth connectivity, users can easily stream their favorite music from smartphones or tablets, while the built-in microphone facilitates hands-free calling. This model also integrates seamlessly with the latest smartphone applications, providing effortless access to navigation and music streaming services.

In comparison, the TDM-9501RM presents a sleek design coupled with high-resolution audio playback capabilities. It emphasizes user-friendly controls that allow for easy navigation through playlists and settings. The seven-band graphic equalizer offers customizable sound adjustments, ensuring a tailored listening experience. Its multi-device compatibility means it can connect with various sources, from traditional CD players to modern digital devices.

The TDM-9501R model focuses on robust connectivity options, featuring multiple USB ports and an auxiliary input that expands compatibility with different audio sources. This model also incorporates Alpine’s patented sound enhancement technologies, such as Dynamic Bass Enhancer, which ensures that bass frequencies are rich and powerful without distortion. Furthermore, the user can access various sound modes, allowing listeners to switch between settings for music, movies, or podcasts.

Lastly, the TDM-9503R combines functionality with versatility. This model includes a dual-zone output that allows for tailored audio experiences in separate cabin areas, perfect for larger vehicles. It also features a built-in digital signal processor (DSP) to optimize sound quality across diverse environments. The high-powered amplifier connected with high-impedance speakers ensures that sound is both loud and clear.

Together, the TDM series from Alpine revolutionizes audio performance in vehicles, providing customers with unmatched flexibility, connectivity, and sound quality. Whether for casual listening or for audiophiles seeking perfection, these models cater to all audio preferences with innovative technologies and robust features.
Top Page Image Contents