JVC KD-LH2000 manual Activating the level meter, Level Meter, Press EQ equalizer twice

Page 28

ENGLISH

Activating the level meter

You can show the level meters on the display while playing any source. This unit is equipped with three level meter patterns.

•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.

Level Meter 1:

The audio level meter fluctuates vertically.

1 Press EQ (equalizer) twice.		Level Meter 2:
EQ	The last selected level meter	The speaker on the display vibrates as input
E	appears on the display.

audio level changes.

2 Select the level meter pattern you want.

As you turn the control

dial, the level meters change as follows:

Off Level 1

Level 3Level 2

Level Meter 3:

The left and right audio level meters appear.

•If the small animation display is selected, only one audio level meter can be shown.

The list below shows the preset value settings for each sound mode.

Sound				Preset values
Sound
modes		Low				Mid			High

	C.Freq.	Q (Width)	Level		C.Freq.	Q (Width)	Level	C.Freq.	Level
	C.Freq.	Q (Width)	Level		C.Freq.	Q (Width)	Level	C.Freq.	Level

Flat	50 Hz	Q1	+00		700 Hz	Q1	+00	8 kHz	+00

Hard Rock	80 Hz	Q2	+03		700 Hz	Q1	+00	8 kHz	+02

R & B	80 Hz	Q3	+03		2 kHz	Q2	+01	12 kHz	+03

Pop	120 Hz	Q1	+02		2 kHz	Q2	+01	12 kHz	+02

Jazz	80 Hz	Q1	+03		1 kHz	Q1	+01	8 kHz	+03

Dance Music	50 Hz	Q2	+04		700 Hz	Q1	–02	8 kHz	+01

Country	50 Hz	Q4	+02		700 Hz	Q1	+00	12 kHz	+02

Reggae	80 Hz	Q1	+03		2 kHz	Q2	+02	12 kHz	+02

Classic	120 Hz	Q1	+03		1 kHz	Q1	+00	8 kHz	+02

User 1	50 Hz	Q1	+00		700 Hz	Q1	+00	8 kHz	+00

User 2	50 Hz	Q1	+00		700 Hz	Q1	+00	8 kHz	+00

User 3	50 Hz	Q1	+00		700 Hz	Q1	+00	8 kHz	+00

28

Image 28

Contents KD-LH2000 For customer UsePrecautions How to reset your unitInformation For U.S.A Contents Location of the Buttons Mode M buttonControl panel Remote controller Preparing the remote controller Installing the batteryRemove the battery holder Place the batteryTurning on the power To drop the volume in a momentTo turn off the power Basic OperationsPSM see Select Off Press SEL select to finish the setting To cancel the display demonstration, followChanging the display pattern Press Disp DListening to the radio Radio OperationsSearching a station automatically Auto search Searching a station manually Manual search When an FM stereo broadcast is hard to receiveSelect the band FM1 3, AM FM1 FM2 FM3 AM Manual preset FM station automatic preset SSMFM1 FM2 FM3 AM Selecting a preset station directly Tuning in to a preset stationSelect the number 1 6 for the preset station you want Selecting a preset station using the preset station list When receiving an AM or FM stationCD Operations Playing a CDTo stop play and eject the disc Open the control panel Insert a disc into the loading slotSelecting CD playback modes To fast-forward or reverse the trackTo go to a particular track directly To go to the next or previous tracksTo cancel the prohibition and unlock the disc Prohibiting CD ejectionWhile pressing CD/CD-CH, press Hold for more than 2 seconds To play back tracks repeatedly Repeat PlayChanging the display pattern What is MP3? Precautions when recording MP3 files on a CD-R or CD-RWMP3 Introduction How are MP3 files recorded and played back?MP3 directory/file configuration MP3 playback/search orderHierarchy Level6MP3 Operations Playing an MP3 discSelecting a directory To fast-forward or reverse the fileTo go to a particular directory directly To skip to the next or previous filesSelecting MP3 playback modes To skip to the next directoryTo skip to the previous directory To select a directory on the list shown on the displayTo play back files repeatedly Repeat Play To play back only intros Intro ScanIntro 1 Intro Intro Off By pressing Disp D, you can change Information shown on the displaySound Adjustments Adjusting the soundAdjust the level Select the item you want to adjustStoring your own sound adjustments Select the sound mode you wantPress EQ equalizer Select the sound mode you want to adjust Enter the sound adjustment modeSound adjustment items If you want to cancel the adjustmentsSelectable values Band Low Mid HighActivating the level meter Level MeterPress EQ equalizer twice Select the level meter pattern you wantBasic Procedure Other Main FunctionsPreferred Setting Mode PSM items To adjust the display contrast level To select the dimmer mode DimmerTo set the movie demo-MovieDemo To select the scroll mode-ScrollSetting the desired color for each source-Source Changing the display colorTo change the FM tuner selectivity To turn on/off the key-touch tone-BeepSelect Source as the Mode color mode setting Source User Enter the source selecting modeEnter the color selecting mode Select the display color AllSourceTurn the control dial to adjust the selected primary color Selecting or adjusting your own color -UserYou can adjust within the range of 0 to +11 Select a source you want to assign a name to To erase the entered charactersSelect a character Detaching the control panel Detaching the control panelAttaching the control panel Unlock the control panelPlaying CDs CD Changer OperationsSelect the CD automatic changer CD-CH Selecting a disc To change the information shown on the displayTo go to the next track or the previous tracks To go to a particular disc directlyTo select a disc using the disc lists Selecting CD playback modesDisplay can show only six disc names at a time To play back tracks at random Random PlayRepeat 1 Repeat Repeat Off On the current disc repeatedlyIntro Highlighted All tracks on All inserted discs Flashes Inserted discPlaying an external component Select the external component LineSymptoms Causes Remedies TroubleshootingPanel Connect Error Control panel is not No disc in the magazine Insert a disc CD Changer MP3 PlaybackMaintenance Handling CDsSpecifications Available charactersFM Tuner AM TunerCall