JVC KD-LH2000 manual Changing the display color, Setting the desired color for each source-Source

Page 32

ENGLISH

To change the FM tuner selectivity

—IF Filter

In some areas, adjacent stations may interfere with each other. If this interference occurs, noise may be heard.

•Auto: When this type of interference occurs, this unit automatically increases the tuner selectivity so that interference noise will be reduced. (But the stereo effect will also be lost.)

•Wide: Subject to the interference from adjacent stations, but sound quality will not be degraded and the stereo effect will not be lost.

To turn on/off the key-touch tone—Beep

You can deactivate the key-touch tone if you do not want it to beep each time you press a button.

• On:	Activates the key-touch tone.
• Off:	Deactivates the key-touch tone.

To select the external component to use

—Ext Input

You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied).

To use the external component as the playback source through this unit, you need to select which component—CD changer or external component —to use.

• Changer:	To use the CD changer.
• Line In:	To use the external component other
	than CD changer.

Note:

For connecting the Line Input Adaptor KS-U57 and the

external component, refer to the Installation/Connection Manual (separate volume).

Changing the display color

You can set the display color using the PSM control. By selecting “Source” as the “Mode” (color mode) setting, you can select your favorite color for each source (or for all sources).

Note:

When selecting “User” as the “Mode” setting, you

can adjust and store your own colors as you like. See page 34.

Setting the desired color for each source—Source

Once you have set the color for each source (or for all sources), the display illuminates in the selected color when the source is selected.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

(See page 30.)

2 Press 5 (up) or ° (down) repeatedly

until “Color” appears as the PSM category on the left side of the display.

3 Select “Mode.”

Currently selected setting for “Mode”

32

Image 32

Contents KD-LH2000 For customer UseInformation For U.S.A How to reset your unitPrecautions Contents Control panel Mode M buttonLocation of the Buttons Remote controller Preparing the remote controller Installing the batteryRemove the battery holder Place the batteryTurning on the power To drop the volume in a momentTo turn off the power Basic OperationsPSM see Select Off Press SEL select to finish the setting To cancel the display demonstration, followChanging the display pattern Press Disp DSearching a station automatically Auto search Radio OperationsListening to the radio Select the band FM1 3, AM FM1 FM2 FM3 AM When an FM stereo broadcast is hard to receiveSearching a station manually Manual search FM1 FM2 FM3 AM FM station automatic preset SSMManual preset Select the number 1 6 for the preset station you want Tuning in to a preset stationSelecting a preset station directly Selecting a preset station using the preset station list When receiving an AM or FM stationCD Operations Playing a CDTo stop play and eject the disc Open the control panel Insert a disc into the loading slotSelecting CD playback modes To fast-forward or reverse the trackTo go to a particular track directly To go to the next or previous tracksTo cancel the prohibition and unlock the disc Prohibiting CD ejectionWhile pressing CD/CD-CH, press Hold for more than 2 seconds To play back tracks repeatedly Repeat PlayChanging the display pattern What is MP3? Precautions when recording MP3 files on a CD-R or CD-RWMP3 Introduction How are MP3 files recorded and played back?MP3 directory/file configuration MP3 playback/search orderHierarchy Level6MP3 Operations Playing an MP3 discSelecting a directory To fast-forward or reverse the fileTo go to a particular directory directly To skip to the next or previous filesSelecting MP3 playback modes To skip to the next directoryTo skip to the previous directory To select a directory on the list shown on the displayIntro 1 Intro Intro Off To play back only intros Intro ScanTo play back files repeatedly Repeat Play By pressing Disp D, you can change Information shown on the displaySound Adjustments Adjusting the soundAdjust the level Select the item you want to adjustStoring your own sound adjustments Select the sound mode you wantPress EQ equalizer Select the sound mode you want to adjust Enter the sound adjustment modeSound adjustment items If you want to cancel the adjustmentsSelectable values Band Low Mid HighActivating the level meter Level MeterPress EQ equalizer twice Select the level meter pattern you wantBasic Procedure Other Main FunctionsPreferred Setting Mode PSM items To adjust the display contrast level To select the dimmer mode DimmerTo set the movie demo-MovieDemo To select the scroll mode-ScrollSetting the desired color for each source-Source Changing the display colorTo change the FM tuner selectivity To turn on/off the key-touch tone-BeepSelect Source as the Mode color mode setting Source User Enter the source selecting modeEnter the color selecting mode Select the display color AllSourceYou can adjust within the range of 0 to +11 Selecting or adjusting your own color -UserTurn the control dial to adjust the selected primary color Select a character To erase the entered charactersSelect a source you want to assign a name to Detaching the control panel Detaching the control panelAttaching the control panel Unlock the control panelSelect the CD automatic changer CD-CH CD Changer OperationsPlaying CDs Selecting a disc To change the information shown on the displayTo go to the next track or the previous tracks To go to a particular disc directlyTo select a disc using the disc lists Selecting CD playback modesDisplay can show only six disc names at a time To play back tracks at random Random PlayRepeat 1 Repeat Repeat Off On the current disc repeatedlyIntro Highlighted All tracks on All inserted discs Flashes Inserted discPlaying an external component Select the external component LinePanel Connect Error Control panel is not TroubleshootingSymptoms Causes Remedies No disc in the magazine Insert a disc CD Changer MP3 PlaybackMaintenance Handling CDsSpecifications Available charactersFM Tuner AM TunerCall