1
[Hold]
2
]<BLUETOOTH> ] <NEW PAIRING>
The device remains registered even after you disconnect the device. Use <CONNECT PH> or <CONNECT AU> (or activate <AUTO CNNCT>, see “Changing the Bluetooth setting”) to connect the same device from next time on.
Deleting a registered device
Switching conversation media (the unit/ | Arriving of a text message |
mobile phone) | When a text message comes in, the unit rings if your |
Press the control dial during a phone call | mobile phone is compatible with text message and |
conversation, then continue your conversation using | <MSG NOTICE> is set to <ON> (see the following). |
the other media. | • You cannot read, edit, or send a message through |
• Operations may be different according to the | the unit. |
connected Bluetooth device. |
|
3
]Enter a PIN (Personal Identification Number) code in to the unit.
You can enter any number you like
• Some devices have their own PIN code. Enter the specified PIN code in to the unit.
4Repeat step 3 until you have finished entering the PIN code.
5
1 
[Hold]
2
]<BLUETOOTH> ] <DELETE PAIR>
3
]Select a device you want to delete.
4
Switching the connected mobile phone
You can switch the current connected mobile phone to the last connected mobile phone.
[Hold]
and “CONNECTING” flashes on the display. When the last connected phone is being reconnected again, “CONNECTED” and “[Device Name]” appear alternately on the display. Now you can use the last connected mobile phone with the unit.
Using the remote controller
5 U/D ∞/2 R/F 3/ : Answers calls
SOURCE
5 U/D ∞/2 R/F 3/ : Rejects calls
SOURCE
[Hold]
: Switches the conversation media (between the unit and mobile phone) during a phone call conversation
]Confirm the entry.
“SEARCH NOW” and “USING PHONE” appear alternately on the display.
6 Use the Bluetooth device to search. |
On the device to be connected, enter the |
same PIN code you have just entered for this |
unit. |
]Select <DELETE YES> to confirm. “DELETED” appears when the device is deleted.
• If <DELETE NO> is selected, the unit returns to step 3 above.
Connecting/disconnecting a registered device
Using a Bluetooth audio player 
Operations and display indications differ depending on their availability on the connected device.
] Select “BT FRONT” or | Selecting the playback modes | |
“BT REAR.” | • For Bluetooth devices that support AVRCP 1.3. | |
• If playback does not start automatically, operate | 1 | |
the Bluetooth audio player to start playback. | ||
[Hold] |
“PAIRING OK“ and “[Device Name]” appear |
alternately when the pairing is established. |
appears when Bluetooth connection is |
established. |
7Use the Bluetooth device to connect* when “CONNECT NOW” and “USING PHONE” alternate on the display.
• Refer to the table below for connectivity
results shown on the display.
*Operations may be different according to the connected device.
Display result | Hands- | Audio | |
Free Call | Streaming | ||
| |||
CONNECT OK j [Device | ‡ | ‡ | |
Name] | |||
|
| ||
H.FREE OK j [Device Name] | ‡ | — | |
A. STREAM OK j [Device |
|
|
1 
[Hold]
2
]<BLUETOOTH> ] <CONNECT PH/
CONNECT AU> or <DISCONNT PH/DISCONNT AU>
•For connecting a device, go to step 3.
•For disconnecting a device, “DISCONNECT” and “[Device Name]” appear alternately on the display when the device is disconnected.
3
] Select a device you want to connect. |
[Hold]
Starts or resumes playback
Mutes the sound
Selects group/folder
Forward skips or reverse skips
2
]“REPEAT” j “RANDOM”
3
REPEAT |
|
TRACK | : Repeats current track |
ALL | : Repeats all tracks |
GROUP | : Repeats all track of current group |
RANDOM |
|
ALL | : Randomly plays all tracks |
GROUP | : Randomly plays all track of current |
| group |
Name] | — | ‡ | |
|
| ||
CONNCT FAIL j TRY | — | — | |
CONNECT | |||
|
|
• “CONNECTING” and “[Device Name]” |
appear alternately, then “CONNECTED” and |
“[Device Name]” appear alternately on the |
display when the device is connected. |
Changing the display information
To cancel repeat play or random play, select “RPT OFF” or “RND OFF.”
• To return to the previous menu, press BACK.
Using a Bluetooth mobile phone 
Making a call | How to enter phone number |
1 | 1 Turn the control dial to select a number. |
|
Current track number with the elapsed playing time = Current track number with the clock time
=Album name/performer = Track title = (back to the beginning)
Using the remote controller
2 R/F 3 | : Reverse skips/Forward |
| skips |
2 R/F 3 | : |
[Hold] | the track |
]Enter “Call Menu” screen.
2
]Select the method to make a call.
•DIALED*1: Shows the list of the phone numbers you have dialed. Go to the following step.
•RECEIVED*1: Shows the list of the received calls. Go to the following step.
•MISSED CALL*1: Shows the list of the missed calls. Go to the following step.
•PHONEBOOK*2: Shows the name/phone number of the phonebook*3. Go to the following step.
•DIAL NUMBER: Shows the “Dial Number” screen. See “How to enter phone number” on the following.
•VOICE DIAL (only accessible when the connected mobile phone has the voice recognition system): Speak the name (registered words) you want to call when
“SAY NAME” appears*4,*5.
*1 “NO HISTORY” appears if there is no history stored. *2 “NO DATA” or “SEND P. BOOK” j “MANUALLY”
appears depending on the <P. BOOK SEL> settings. *3 Depends on the <P. BOOK SEL> settings.
*4 Operations may be different according to the connected device.
*5 “NOT SUPPORT” appears if the connected phone does not support this feature.
3
]Select the name/phone number you want to call.
•When the sound is stopped or interrupted during the use of a Bluetooth device, turn off, then turn on the unit.
2Press 4
/¢
to move the entry position.
3Repeat steps 1 and 2 until you finish entering the phone number.
4Press the control dial to confirm the entry.
How to delete name/phone number
Only when <PB IN UNIT> is selected for <P. BOOK SEL>, see “Changing the Bluetooth settings.”
1Press 
to enter “Call Menu” screen.
2Display the list of name/phone numbers using
one of the dialing method (see step 2 of “Making a call”).
3Turn the control dial to select the name/phone number you want to delete.
4Press and hold BACK to enter the “Delete Entries” screen.
5Turn the control dial to select “DELETE” or “DELETE ALL.”
•If “DELETE” is selected, the selected name/ phone number in step 3 is deleted.
•If “DELETE ALL” is selected, the listed numbers in step 2 selection are deleted.
6Press the control dial to confirm.
Receiving a call
When a call comes in, the source is automatically changed to “BT FRONT/BT REAR.” “RECEIVING” appears for a while, then the phone number or name appears on the display.
When <AUTO ANSWER> is activated....
The unit answers the incoming calls automatically, see “Changing the Bluetooth setting.”
•Press 
or the control dial to answer the incoming call when <AUTO ANSWER> is deactivated.
•Press 5/∞ to adjust the microphone volume (01 – 03) during a phone call conversation. See the following to preset the microphone volume.
•Press 4 
/¢ 
to turn on/off the Noise Reduction and Echo Cancelation mode. (See the following.)
To end the call an incoming call, press and hold
or the control dial.
Changing the Bluetooth settings 
1 | 2 | 3 |
| [Hold] |
|
| ] <BLUETOOTH> ] | ] Select a setting item, then repeat the |
| <SETTINGS> | procedure to change the setting accordingly. |
•To return to the previous menu, press BACK.
•To exit from the menu, press DISP or MENU.
Setting item |
|
| Selectable setting, [Initial: Underlined] |
AUTO CNNCT | • LAST | : The connection is established automatically with the last connected | |
| • OFF | Bluetooth device when you turn on the unit. | |
| : The unit does not connect the Bluetooth device automatically. | ||
|
| Connect the device manually. See “Connecting/disconnecting a | |
|
| registered device.” | |
AUTO ANSWER | • ON | : The unit answers the incoming calls automatically. | |
| • OFF | : The unit does not answer the calls automatically. Answer the calls | |
|
| manually. See “Receiving a call.” | |
MSG NOTICE | • ON | : The unit informs you of the arrival of a message by ringing and | |
| • OFF | displaying “RCV MESSAGE.” | |
| : The unit does not inform you of the arrival of a message. | ||
MIC LEVEL | : Adjust the volume of the microphone connected to the unit. [ LEVEL 01/02/03 ] | ||
NR/EC MODE | • ON | : The unit adjusts the Noise Reduction and Echo Cancellation of the | |
|
| microphone connected to the unit for clearer sound. | |
| • OFF | : Cancels. | |
RING TONE | • IN UNIT | : The unit rings to alert you when a call/Text Message comes in. | |
|
| CALL: | Select your preferred ring tone when a call comes in. |
|
|
| [ TONE 1/2/3 ] |
MESSAGE: Select your preferred ring tone when a Text Message comes in. [ TONE 1/2/3 ]
•IN PHONE : The unit rings (using the connected phones’ ring tone) to alert you when a call/Text Message comes in. (The connected mobile phone rings if it does not support this feature.)
P. BOOK SEL*1 • PB IN PHONE : The unit browses the phonebook of the connected phone.
•PB IN UNIT : The unit browses the phonebook registered in the unit.
P. BOOK WAIT : You can copy the phonebook memory of a mobile phone into the unit (via OPP). Enter the PIN code to the unit to transfer the phonebook into the unit. You can transfer a maximum of 400 numbers.
INITIALIZE | • YES | : Initialize all the Bluetooth settings (including stored pairing, |
|
| phonebook, and etc.). |
| • NO | : Cancels. |
*1 Selectable only when the connected phone supports PBAP.
3