JVC KW-XC770 Selecting the external component to use, Turning on or off the display demonstration

Page 26

ENGLISH

Selecting the external component to use

You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied).

To use the external component as the playback source through this unit, you need to select which component — CD changer or external component — to use. When shipped from the factory, CD changer is selected as the external component.

LINE IN ON: To use the external component other than CD changer LINE IN OFF:To use the CD changer

1 Press SEL for more than 2 seconds.

One of the PSM items appears on the display.

2 If “PSM LINE IN” does not appear, press ¢ or 4 repeatedly until it appears.

\

The current setting appears.

3 Turn the control dial to select either “LINE IN ON” (external component) or “LINE IN OFF” (CD changer).

4 Press SEL again to finish the setting.

Note:

•For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/Connection Manual (separate volume).

Turning on or off the display demonstration

When shipped from the factory, this function is set to on.

With this function turned on, the unit automatically starts the following display demonstration if no signal comes in for about 3 minutes except in the following case.

•When you turn on the unit for the first time after installation or after pressing the reset button, it starts if no signal comes in for about 10 seconds.

JVC CD CASSETTE

If you want to turn off the display demonstration, follow the procedure below.

1 Press SEL for more than 2 seconds.

One of the PSM items appears on the display.

2 If “PSM DEMO” does not appear, press ¢ or 4 repeatedly until it appears.

\

The current setting appears.

3 Turn the control dial to the left to turn off the function (or turn it to the right to turn on the function again).

4 Press SEL again to finish the setting.

26

Image 26

Contents Instructions KW-XC770Precautions Information For USAContents Remote Operations Adjust the sound as you want see pages 19 Turn on the powerTo turn up the Adjust the volume Basic OperationsYou can select any one of FM1, FM2, and FM3 to listen to an When a station is received, searching stopsSelect the band FM1, FM2, FM3 or AM FM stationPress and hold both buttons for more than 2 seconds Automatic preset SSMStoring stations in memory See page 6 to tune into a station Manual presetTune into a station of 88.3 MHz Storing your favorite station into the EX extra button Select the band FM1, FM2, FM3 or AM you want Tuning into a preset stationSelect the number 1 6 for the preset station you want To tune in the favorite station EXScanning broadcast stations When an FM stereo broadcast is hard to receiveOther convenient tuner functions Selecting FM reception soundInsert a disc into the loading slot CD OperationsPlaying a CD To stop play and eject the CDGoing to the next tracks or the previous tracks Locating a track or a particular portion on a CDFast-forwarding or reversing the track Going to a particular track directlyTo play back tracks at random Random Play Selecting CD playback modesProhibiting CD ejection To play back tracks repeatedly Repeat PlayInsert a cassette Tape OperationsListening to a tape Select the tape directionPress ¢ for more than 1 second to fast-forward the tape To stop play and eject the cassetteTo fast-forward and rewind a tape Tape play starts from that position on the tapeCurrent tune on the tape Finding the beginning of a tuneTo locate a tune ahead Playing the current tune repeatedly Other convenient tape functionsSkipping blank portions on the tape Prohibiting tape ejectionSelect the sound mode you want Sound AdjustmentsSelecting preset sound modes Indication For Preset valuesAdjust the level Adjusting the soundSelect SEL the item you want to adjust Indication To do RangeStoring your own sound adjustments Selecting spectrum analyzer patterns Select the spectrum analyzer selection modeSpectrum Analyzer Select the spectrum analyzer selection pattern you wantSpectrum analyser patterns Other Main Functions Changing general settings PSMSetting the clock Selecting the dimmer mode Turning on or off the key-touch toneSelecting the external component to use Turning on or off the display demonstrationRemote Operations Installing the batteriesBefore using the remote controller Using the remote controller Searches stations while listening to the radioCD Changer Operations Playing CDsTo go to a particular disc directly To fast-forward or reverse the trackTo go to the next tracks or the previous tracks Selecting CD playback modes Mode RND indicator Plays at randomMode RPT indicator Plays repeatedly Select the external component Adjust the volumeTo turn up the volume To turn down the volume PreparationsTo keep the tape clean MaintenanceTo clean the heads Handling cassettesHandling CDs Troubleshooting Symptoms Causes RemediesReset 1-RESET About mistrackingAM Tuner SpecificationsFM Tuner Sensitivity 20 µV Selectivity 35 dBCall