JVC KW-XC770 manual Other convenient tuner functions, Scanning broadcast stations

Page 11

Other convenient tuner functions

¢

4

SEL

RPT MO

Control dial

SCAN Ù

Scanning broadcast stations

When you press SCAN Ù (Scan/Dolby NR) while listening to the radio, station scanning starts. (“SCAN” appears on the display.) Each time a

SCANbroadcast is tuned in, scanning stops for about 5 seconds (tuned frequency number flashes on the display), and you can check what program is now being broadcasted.

If you want to listen to that program, press the same button again to stop scanning.

Selecting FM reception sound

When an FM stereo broadcast is hard to receive:

Press RPT MO (Repeat/Monaural) while listening to an FM stereo broadcast. The sound you hear becomes monaural but reception will be improved.

ENGLISH

RPT

MO

Lights up when receiving an FM broadcast in stereo.

J

ANA

To restore the stereo effect, press the same button again.

Changing the AM/FM channel intervals

When this unit is shipped from the factory, the channel intervals are set to 10 kHz for AM and 200 kHz for FM (so that the unit can be used in North and South America).

When using this unit in an area other than North and South America, change the channel intervals by following the procedure below.

•AREA EU: Select this when used in an area other than North and South America.

•AREA US: Select this when used in North or South America.

1 Press SEL for more than 2 seconds.

One of the PSM items appears on the display.

2 If “PSM AREA” does not appear, press ¢ or 4 repeatedly until it appears.

3 Turn the control dial to the right.

“AREA EU” appears and the channel intervals are set to 9 kHz for AM and 50 kHz (for manual tuning) / 100 kHz (for searching) for FM.

4 Press SEL again to finish the setting.

To reset to the factory setting, follow the above step 1 and 2, then turn the control dial to the left in step 3 (“AREA US” appears on the display).

11

Image 11

Contents KW-XC770 InstructionsInformation For USA PrecautionsContents Remote Operations Basic Operations Turn on the powerTo turn up the Adjust the volume Adjust the sound as you want see pages 19FM station When a station is received, searching stopsSelect the band FM1, FM2, FM3 or AM You can select any one of FM1, FM2, and FM3 to listen to anPress and hold both buttons for more than 2 seconds Automatic preset SSMStoring stations in memory See page 6 to tune into a station Manual presetTune into a station of 88.3 MHz Storing your favorite station into the EX extra button To tune in the favorite station EX Tuning into a preset stationSelect the number 1 6 for the preset station you want Select the band FM1, FM2, FM3 or AM you wantSelecting FM reception sound When an FM stereo broadcast is hard to receiveOther convenient tuner functions Scanning broadcast stationsTo stop play and eject the CD CD OperationsPlaying a CD Insert a disc into the loading slotGoing to a particular track directly Locating a track or a particular portion on a CDFast-forwarding or reversing the track Going to the next tracks or the previous tracksTo play back tracks repeatedly Repeat Play Selecting CD playback modesProhibiting CD ejection To play back tracks at random Random PlaySelect the tape direction Tape OperationsListening to a tape Insert a cassetteTape play starts from that position on the tape To stop play and eject the cassetteTo fast-forward and rewind a tape Press ¢ for more than 1 second to fast-forward the tapeCurrent tune on the tape Finding the beginning of a tuneTo locate a tune ahead Prohibiting tape ejection Other convenient tape functionsSkipping blank portions on the tape Playing the current tune repeatedlyIndication For Preset values Sound AdjustmentsSelecting preset sound modes Select the sound mode you wantIndication To do Range Adjusting the soundSelect SEL the item you want to adjust Adjust the levelStoring your own sound adjustments Select the spectrum analyzer selection pattern you want Select the spectrum analyzer selection modeSpectrum Analyzer Selecting spectrum analyzer patternsSpectrum analyser patterns Other Main Functions Changing general settings PSMSetting the clock Turning on or off the key-touch tone Selecting the dimmer modeTurning on or off the display demonstration Selecting the external component to useRemote Operations Installing the batteriesBefore using the remote controller Searches stations while listening to the radio Using the remote controllerPlaying CDs CD Changer OperationsTo go to a particular disc directly To fast-forward or reverse the trackTo go to the next tracks or the previous tracks Selecting CD playback modes Mode RND indicator Plays at randomMode RPT indicator Plays repeatedly Preparations Adjust the volumeTo turn up the volume To turn down the volume Select the external componentHandling cassettes MaintenanceTo clean the heads To keep the tape cleanHandling CDs Symptoms Causes Remedies TroubleshootingAbout mistracking Reset 1-RESETSensitivity 20 µV Selectivity 35 dB SpecificationsFM Tuner AM TunerCall