JVC KS-FX725R service manual External Component Operations

EXTERNAL COMPONENT OPERATIONS

DISP

DAB

TP

RDS

PTY

7 8 9 10 11 12 MO

ENGLISH

This section is only for KS-FX725R.

Playing an external component

You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied).

Preparations:

•For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/ Connection Manual (separate volume).

•Before operating the external component using the following procedure, select the external input correctly. (See “To select the external component to use – EXT IN” on page 25.)

2 Turn on the connected component and start playing the source.

3 Adjust the volume.

4 Adjust the sound characteristics you want. (See page 19.)

1 Select the external component (CD-CH).

• If “LINE IN”* does not appear on the display, see page 25 and select the external input (“LINE IN”).

*Displayed only when one of the following sources is selected — FM, AM and Tape.

Note on One-Touch Operation:

When you press CD-CH, the power automatically

comes on. You do not have to press to turn on the power.

29