Alpine HCE-100XM Manual: Operating Instructions for Velcro Detour Sign Safety

Operating Instructions

WARNING

USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.

Use for other than its designed application may result in fire, electric shock or other injury.

WARNING

This symbol means important instructions. Failure to heed them can result in serious injury or death.

DO NOT DISASSEMBLE OR ALTER.

Doing so may result in an accident, fire or electric shock.

KEEP SMALL OBJECTS SUCH AS BATTERY OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to electrical shorts.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or product damage.

USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.

Failure to do so may result in fire or electric shock.

DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.

Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions.

Failure to do so may result in an accident.

MINIMIZE DISPLAY VIEWING WHILE DRIVING.

Viewing the display may distract the driver from looking ahead of the vehicle and cause an accident.

DO NOT BLOCK VENTS OR RADIATOR PANELS.

Doing so may cause heat to build up inside and may result in fire.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.

Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, shift lever, brake pedals, etc. can be extremely hazardous.

DO NOT FOLLOW ROUTE SUGGESTIONS IF THE NAVIGATION SYSTEM INSTRUCTS YOU TO PERFORM AN UNSAFE OR ILLEGAL MANEUVER, OR PLACES YOU IN AN UNSAFE SITUATION OR AREA.

This product is not a substitute for your personal judgment. Any route suggestions by this system should never supersede any local traffic regulations or your personal judgment or knowledge of safe driving.

2-EN

HCE-100XM specifications

The Alpine HCE-100XM is a cutting-edge rearview camera system designed to enhance vehicle safety and driving convenience. This product is a great addition for anyone looking to upgrade their vehicle's multimedia and safety features. One of its most notable characteristics is the high-resolution camera that provides a clear and vibrant image of the area behind the vehicle. With a 720p HD video output, drivers can enjoy enhanced visibility, which is especially useful during reversing or parking maneuvers.

The HCE-100XM employs advanced Wide Viewing Angle technology, offering a 190-degree field of view. This allows for a comprehensive perspective of the rear surroundings, significantly reducing blind spots and improving overall safety. The camera is also equipped with an enhanced night vision function, allowing users to see clearly in low-light conditions. This feature utilizes infrared lighting to ensure that the camera captures clear, detailed images, even in the dark.

In addition to its impressive imaging capabilities, the HCE-100XM is designed with durability in mind. The camera is housed in a weatherproof casing, ensuring that it can withstand harsh environmental conditions, be it rain, snow, or extreme temperatures. This makes it a dependable choice for drivers in various climates.

Integration is another significant advantage of the HCE-100XM. The system can easily connect to a range of compatible Alpine receivers, allowing for seamless operation and control. This connectivity enhances the overall user experience, enabling features such as grid lines for assistance in parking and guiding maneuvers. The camera setup is user-friendly, allowing for quick installation, with options for surface or flush mounting.

One of the standout technologies in the HCE-100XM is its ability to incorporate vehicle speed detection. This feature enables the system to adjust its settings based on the speed of the vehicle, improving image quality and response times during high-speed maneuvers. The system also includes multiple video inputs, allowing for additional cameras if desired.

In summary, the Alpine HCE-100XM combines advanced image processing technology, convenient integration features, and robust construction to create a safety-focused rearview camera system. With excellent image quality, wide-angle capability, and weatherproof reliability, it is designed to meet the modern driver's needs. Whether for personal use or as part of a fleet management solution, the HCE-100XM stands out as a top choice for enhancing road safety and driving confidence.