TAPE OPERATIONS
ENGLISH
Listening to a cassette
You can playback type 1 (normal) tapes.
1 Turn on the power.
/I/ATT
Note on
If a cassette is already in the cassette compartment, tape play starts automatically. However, it is not recommended to leave the cassette in the compartment when turning off the power or ignition key. It may damage the tape head and the cassette.
2 Insert a cassette into the cassette compartment.
To stop play and eject the cassette.
Press 0.
Tape play stops and the cassette automatically ejects from the cassette compartment. The source changes to the previously selected one.
•You cannot change the source if the cassette is still in the cassette compartment.
To change source, you must eject the cassette first.
•You can also eject the cassette by pressing 0 while the unit is turned off.
To fast-wind a tape.
PROG
When one side of the tape reaches its end during play, the other side of the tape automatically starts playing. (Auto Reverse)
Press in ¡ or 1.
The tape will be wound in the direction of the arrows (¡ or 1).
3 Select the tape direction.
Press both buttons at the same time.
PROG Each time you press both buttons, the tape direction changes alternately –
forward ( 
) and
reverse ( 
).
Tape direction
To restart playback, lightly press the other button which is not pressed in (1 or ¡).
10