Other convenient tuner functions
Scanning broadcast stations
RPT | When you press RPT/SCAN while |
SCAN | listening to the radio, station |
| |
| scanning starts. Each time a |
| broadcast is tuned in, scanning |
| stops for about 5 seconds (tuned |
| frequency number flashes on |
| the display), and you can check |
| what program is now being |
| broadcast. |
| If you want to listen to that |
| program, press the same button |
| again to stop scanning. |
Changing the AM/FM channel intervals |
| |
ENGLISH | ||
channel intervals are set to 10 kHz for AM and 200 | ||
When using this unit in an area other than North |
| |
or South America: |
| |
When this unit is shipped from the factory, the |
| |
kHz for FM. You can change the channel intervals |
| |
| ||
by following the procedure below. |
|
1 | Press SEL (Select) for more than 2 seconds. |
| “CLOCK H”, “CLOCK M” or “AREA” appears on |
| the display. |
2 | If “AREA” does not appear, press4 or |
3 | ¢ until it appears. |
Press +. | |
| “AREA EU” appears and the channel intervals |
| are set to 9 kHz for AM and 50 kHz (for manual |
| tuning) / 100 kHz (for searching) for FM. |
To reset to the factory setting, follow the above step 1 and 2, then press – in step 3 (“AREA US” appears on the display.)
AREA EU : Select this when used in an area other than North and South America.
AREA US: Select this when used in North or South America.
9