Alpine CDE-9842 owner manual Information, Case of Difficulty, Basic, Radio, Audio

Page 19

Information

In Case of Difficulty

If you encounter a problem, please turn the power off, then on again. If the unit is still not functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alpine dealer.

Basic

No function or display.

•Vehicle's ignition is off.

-If connected following instructions, the unit will not operate with the vehicle's ignition off.

•Improper power lead (Red) and battery lead (Yellow) connections.

-Check power lead and battery lead connections.

•Blown fuse.

-Check the fuse of the unit; replace with the proper value if necessary.

•Internal micro-computer malfunctioned due to interference noise etc.

-Press the RESET switch with a ballpoint pen or other pointed article.

Radio

Unable to receive stations.

•No antenna or open connection in cable.

-Make sure the antenna is properly connected; replace the antenna or cable if necessary.

Unable to tune stations in the seek mode.

•You are in a weak signal area.

-Make sure the tuner is in the DX mode.

•If the area you are in is a primary signal area, the antenna may not be grounded and connected properly.

-Check your antenna connections; make sure the antenna is properly grounded at its mounting location.

•The antenna may not be the proper length.

-Make sure the antenna is fully extended; if broken, replace the antenna with a new one.

Broadcast is noisy.

•The antenna is not the proper length.

-Extend the antenna fully; replace it if it is broken.

•The antenna is poorly grounded.

-Make sure the antenna is grounded properly at its mounting location.

CD

CD Player not functioning.

•Out of operating temperature range +50˚C (+120˚F) for CD. - Allow the vehicle's interior (or trunk) temperature to cool.

CD playback sound is wavering.

•Moisture condensation in the CD Module.

-Allow enough time for the condensation to evaporate (about 1 hour).

CD insertion not possible.

•A CD is already in the CD player.

-Eject the CD and remove it.

•The CD is being improperly inserted.

-Make sure the CD is being inserted following instructions in the CD Player Operation section.

Unable to fast forward or backward the CD.

•The CD has been damaged.

-Eject the CD and discard it; using a damaged CD in your unit can cause damage to the mechanism.

CD playback sound skips due to vibration.

•Improper mounting of the unit.

-Securely re-mount the unit.

•The disc is very dirty.

-Clean the disc.

•The disc has scratches.

-Change the disc.

•The pick-up lens is dirty.

-Do not use a commercially available lens cleaner disc. Consult your nearest Alpine dealer.

CD playback sound skips without vibration.

•The disc is dirty or scratched.

- Clean the disc; damaged disc should be replaced.

Error displays (built-in CD player only)

•Mechanical error

-Press c. After the error indication disappears, insert the disc again. If the above-mentioned solution does not solve the problem, consult your nearest Alpine dealer.

CD-R/CD-RW playback not possible

•Close session (finalization) has not been performed. - Perform finalization and attempt playback again.

MP3 (CDE-9846 only)

MP3 is not played back.

•Writing error occurred. The CD format is not compatible.

-Make sure the CD has been written in a supported format. Refer to “About MP3” (pages 10-11), then rewrite in the format supported by this device.

* CDE-9846 is compatible with MP3.

Audio

The sound is not output from the speakers.

•Unit has no output signal of the internal amplifier. - PWR-IC is switched to “ON” (page 17).

18-EN

Page 18 Page 20
Image 19
Page 18 Page 20
Contents CDE-9846 Contents Operating Instructions Never Attempt the Following On handling Compact Discs CD/CD-R/CD-RW Getting Started Listening to Radio Manual Storing of Station PresetsPress TUNE/A.ME to select the tuning mode RadioTuning to Preset Stations Automatic Memory of Station PresetsMP3 Play Display PlaybackPress g or f to select the desired track file To eject the disc, press cSearching CD Text CDE-9846 only Repeat PlayX. Random Play Scanning ProgramsQuick Search CDE-9846 only File Name Search modeFolder Name Search mode File/Folder Name Search concerning MP3 CDE-9846 onlyCorresponding File Systems TerminologyWidth Sound SettingSetting the Bass Control DefeatSeconds to activate or deactivate the loudness mode Setting the Treble ControlTurning Loudness On/Off Press Title About the indicator displayOther Functions Displaying the Title/TextDisplaying Time Setting TimeTitling Discs/Radio Stations Erasing Disc Title/Radio Station TitleVisual Customizing CDE-9846 only Sound CustomizingPlaying MP3 Data CDE-9846 only Connecting to an External AmplifierMP3 CDE-9846 only External DeviceRadio InformationCase of Difficulty BasicIndication for CD Player SpecificationsInstallation and Connections Removal Accessory ListPull the unit out, keeping it unlocked as you do so Front right Rear right Rear left Antenna To power antenna To amplifier or equalizerIgnition Key Battery Speakers ConnectionsTo prevent external noise from entering the audio system Illumination Lead Orange CDE-9846 onlyLimited Warranty

CDE-9842 specifications

The Alpine CDE-9842 is a dynamic mix of cutting-edge technology and user-friendly features, designed to elevate the driving experience through superior audio quality and versatility. This car stereo unit is particularly revered for its robust sound performance, making it a popular choice among car audio enthusiasts.

One of the standout features of the CDE-9842 is its high-quality sound reproduction. The unit comes equipped with a powerful built-in amplifier that enhances audio clarity and delivers crisp, dynamic sound. The 24-bit DAC (Digital-to-Analog Converter) ensures that the audio signal is processed efficiently, resulting in an accurate reproduction of your favorite music.

The CDE-9842 supports various playback formats, including MP3, WMA, and AAC, allowing you to enjoy your music library from multiple sources. In addition to traditional CDs, the unit features a USB port for connecting flash drives, enabling direct playback of digital audio files. This flexibility makes it easy to listen to an extensive array of music without the hassle of carrying physical discs.

Connectivity is another strong suit of the CDE-9842. It includes Bluetooth technology, which offers seamless wireless audio streaming from smartphones and other devices. This feature not only allows for hands-free calling but also makes it easy to access your favorite playlists while keeping your focus on the road.

Another key component of the CDE-9842 is its customizable user interface. The unit features an intuitive control layout with a vibrant display that can be adjusted for brightness, enhancing visibility in various lighting conditions. Users can personalize their sound experience with adjustable equalizer settings, allowing them to fine-tune the audio output according to their preferences.

Furthermore, the CDE-9842 is equipped with a built-in AM/FM tuner, providing access to a wide range of radio stations. It also includes the capability for satellite radio compatibility, expanding your listening options even further.

In terms of installation, the Alpine CDE-9842 is designed for easy integration into a variety of vehicle models. Its standard 1-DIN form factor makes it a versatile choice for those looking to upgrade their car's audio system.

Overall, the Alpine CDE-9842 combines impressive sound quality, modern connectivity options, and user-friendly features, making it a standout choice for anyone seeking to enhance their in-car audio experience. Whether you're a casual listener or an avid audiophile, this head unit promises a satisfying sound journey on the road.
Top Page Image Contents