Alpine CDE-9842 owner manual Specifications, Indication for CD Player

Indication for CD Player

HI TEMP

•Protective circuit is activated due to high temperature.

-The indication will disappear when the temperature returns to normal operating range.

NO DISC

•No CD is inserted.

-Insert a CD.

•Although a disc is inserted, “NO DISC” is displayed and the unit does not start to play or eject the disc.

-Remove the disc by following these steps:

Press the c button again for at least 2 seconds.

If the disc still does not eject, consult your Alpine dealer.

ERROR

•Mechanism error.

1)Press the c button and eject the CD.

If not ejecting, consult your Alpine dealer.

2)When the error indication remains after ejecting, press the c button again.

If the error indication still does not turn off after pressing the c button for a few times, consult your Alpine dealer.

•When “ERROR” is displayed:

If that the disc cannot be ejected by pressing c, press the RESET switch (refer to page 5) and press c again.

If the disc still cannot be ejected, consult your Alpine dealer.

•The disc is not compatible with the unit.

- Insert a disc which is compatible with the unit.

UNSUPORT (CDE-9846 only)

•The disc is not written in a MP3 supported format. - Use a disc written at the MP3 supported format.

Specifications

FM TUNER SECTION
Tuning Range	87.7 – 107.9 MHz**
Mono Usable Sensitivity	9.3 dBf (0.8 µV/75 ohms)
50 dB Quieting Sensitivity	13.5 dBf (1.3 µV/75 ohms)
Alternate Channel Selectivity	80 dB
Signal-to-Noise Ratio	65 dB
Stereo Separation	35 dB
Capture Ratio	2.0 dB
AM TUNER SECTION
Tuning Range	530 – 1,710 kHz**
Sensitivity (IEC Standard)	22.5 µV/27 dB
CD PLAYER SECTION
Frequency Response	5 – 20,000 Hz (±1 dB)
Wow & Flutter (% WRMS)	Below measurable limits
Total Harmonic Distortion	0.008% (at 1 kHz)
Dynamic Range	95 dB (at 1 kHz)
Signal-to-Noise Ratio	105 dB
Channel Separation	85 dB (at 1 kHz)
PICKUP
Wave length	795 nm
Laser power	CLASS I
GENERAL
Power Requirement	14.4 V DC
	(11–16 V allowable)
Power Output	16 W RMS ⋅ 4*

*Primary amplifier ratings per CEA-2006 Standard

•Power output: measured at 4 Ohms and ≤ 1% THD+N

•S/N: 80 dBA (reference: 1 W into 4 Ohms)

Bass	+20 dB/-14 dB at 100 Hz
Treble	±14 dB at 10 kHz
Maximum Pre-Output Voltage	2 V/10 k ohms
Weight	1.6 kg (3 lbs. 8 oz)
CHASSIS SIZE
Width	178 mm (7")
Height	50 mm (2")
Depth	160 mm (6-1/4")
NOSEPIECE SIZE
Width	170 mm (6-3/4")
Height	46 mm (1-13/16")
Depth	18 mm (11/16")

•Due to continuous product improvement, specifications and design are subject to change without notice.

**CDE-9846:

When you choose “AREA 2” in the section “Changing the Radio Frequencies for each Country” (page 6), the tuning range is as follows.

FM : 87.5 - 108.0 MHz

AM : 531 - 1,602 kHz

19-EN