Kenwood KDC-248U instruction manual Listening to the other external components, Maintenance

Listening to the other external components

Preparation: Make sure [ON1] or [ON2] is selected for [BUilTIN AUX). (page 6)

~:=:::::>"'"' --',

~~~~~~~~~~~~~~~~~~~~~~~~~lE~~~

1 Press <!> SRC to select II AUX." Auxiliary input jack

2Turn on the external component and start playing.

3Turn the volume knob to adjust the volume.

.....

........·

3.5 mm (3/16") stereo mini plug (optional accessory)

Portable audio device (optional accessory)

r------- '------ .~--- ----- ·· - ·· - 1

Maintenance

Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to observe this precaution may result in damage to the monitor or unit.

ICleaning the connector: Wipe off dirt on the connector of the unit and faceplate. Use a cotton swab or cloth.

Handling discs

-Do not touch the recording surface of the disc.

-Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

-Do not use any accessories for the disc.

I - Clean from the center of the disc and move outward.

-Clean the disc with a dry silicon or soft cloth. Do not use any solvents. I- When removing discs from this unit, pull them out horizontally.

I- Remove the rims from the center hole and disc edge before inserting a disc.

I

!

I

I

i

I

12