Kenwood KDC-248U instruction manual Troubleshooting

Troubleshooting

			Adjust the volume to the optimum level. / Check the cords and connections.
			I Check to be sure the terminals of the speaker leads are covered with insulati~
			tape properly, then reset the unit. If "PROTECT" does not disappear, consult your
			nearest service center.
The unit does not work at all.			Reset the unit.
Radio reception is poor. / Static noise while Connect the antenna firmly. / Pull the antenna out all the way.
listening to the radio.
"IN" flashes.			The CD player is not operating properly. Reinsert the disc properly. Ifthe condition
			did not improve, turn off the unit and consult your nearest service center.
-------------- + --- _ ........ : ... -					----- _ .__._------_.-....----_.
CD-R/CD-RW cannot be played back and			Insert afinalized CD-R/CD-RW (finalize with the component which you used for
tracks cannot be skipped.			recording) .
Disc sound is sometimes interrupted.			Stop playback while driving on rough roads. / Change the disc. / Check the cords
			I
			.. and connections.
"NA FILE" appears.	.	.~s playing an unsupported audio file.				....,.. ..
"NO DISC appears.			IInsert aplayable diSC into the loading slot
"TOC ERROR" appears.			The CD is quite dirty. / The CD is upside-down. / The CD is scratched alot. Try
			another disc instead.
------------ + ---				-------------
"ERROR 99" appears.			The unit is malfunctioning for some reason. Press the reset button on the unit. If
			the "ERROR 99" code does not disappear, consult your nearest service center.				_.
._ ---- _ . ---+-						._-_._
"COpy PRO" appears.			Acopy-protected file is played.
"READ ERROR" appears.			Copy the files and folders for the USB device again. If the error message is still
___________-+---displayed,'				initialize the USB device or use other USB devices.		.._ .
			---C
"NO DEVICE" appears.			No USB device is connected. Connect an USB device, and change the source to
------------- _ . -			I USB again.		._-----------
			-
"NO MUSIC appears.			The connected USB device contains no playable audio file.
					-- _ . _ ---- _..._-._--
"NA DEVICE" appears.			IConnect asupported USB device, and check the connections.			,
"USBERROR"appea~.			l Remove the USB device, turn the unit off, then turn it on again. Ifthe unit sti II
----------			showing the same display, try to connect another USB device.
"iPod ERROR" appears.			..Beconne~t the iPod. / Confirm that the sohware !~r_!~~~d			is th~te~_:::"t:!.~!.?~~ __
Noise is generated.		=iI Skip to another track or change the disc.
Tracks cannot play back as you have			IPlayback order is determined when files are recorded.
intended them to play.						--_._-------
"READING" keeps flashing.			Longer readout time is required. Do not use too many hierarchies and folders.u,				_
Elapsed playing time is not correct.			This is caused by how the tracks are recorded.
					----- _ . _ --
The number of songs contained in "SONGS"			Podcast files are not counted in this unit as this unit does not support the
category of this unit is different from that			Iplayback of podcast files.
contained in "SONGS" category of iPoU
Correct characters are not displayed (e.g.			\ This unit can only display letters (upper case), numbers, and alimited number
album name).		~ of symbols.

14