Function settings

1Press the volume knob to enter [FUNCTION] mode.

2Turn the volume knob to select [AUDIO CONTROL] / [AUDIO CTRL] or [SETTINGS], then press to enter.

3Turn the volume knob to make a selection, then press to confirm.

See table below for selection.

Repeat step 3 until the desired item is selected/activated.

Press to return to the previous item.

4Hold to finish the procedure.

[AUDIO CONTROL] / [AUDIO CTRL] : While listening to any source except in STANDBY state...

	Item			Selectable setting (Preset: *)

SUB-W LEVEL		Except for	:
		–15 — +15 (Preset: 0): Adjusts the subwoofer output level.
BASS LEVEL		–8 — +8 (Preset: 0): Source tone memory: Adjusts the level to memorize in each source. (Before
MID LEVEL		making an adjustment, select the source you want to adjust.)
TRE LEVEL
EQ PRO
	BASS ADJUST	BASS CTR FRQ/ BASS C FRQ		60/ 80/ 100 */ 200: Selects the center frequency.

		BASS LEVEL		–8 — +8 (Preset: 0): Adjusts the level.

BASS Q FACTOR/ BASS Q FCTR 1.00 */ 1.25/ 1.50/ 2.00: Adjusts the quality factor.

		BASS EXTEND		ON: Turns on the extended bass. ; OFF *: Cancels.
	MID ADJUST	MID CTR FRQ/ MID C FRQ		0.5K/ 1.0K */ 1.5K/ 2.5K: Selects the center frequency.

		MID LEVEL		–8 — +8 (Preset: 0): Adjusts the level.

		MID Q FACTOR/ MID Q FCTR		0.75/ 1.00 */ 1.25: Adjusts the quality factor.

	TRE ADJUST	TRE CTR FRQ/ TRE C FRQ		10.0K/ 12.5K */ 15.0K/ 17.5K: Selects the center frequency.

		TRE LEVEL		–8 — +8 (Preset: 0): Adjusts the level.
PRESET EQ		NATURAL*/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL: Selects a preset sound mode
		suitable to the music genre. (Selects [USER] to use the customized bass, middle, and treble settings.)

BASS BOOST		B.BOOST LV1/ B.BOOST LV2/ B.BOOST LV3: Selects your preferred bass boost level. ;
		B.BOOST OFF*: Cancels.

LOUDNESS		LOUDNESS LV1/ LOUD LV1/ LOUDNESS LV2/ LOUD LV2: Selects your preferred low and high
		frequencies boost to produce a well-balanced sound at a low volume level. ;
		LOUDNESS OFF/ LOUD OFF: Cancels.

BALANCE		L15 — R15 (Preset: 0): Adjusts the left and right speaker output balance.

FADER		R15 — F15 (Preset: 0): Adjusts the rear and front speaker output balance.

SUBWOOFER SET/		Except for	:
SUB-W SET		ON*: Turns on the subwoofer output. ; OFF: Cancels.

Continued...

ENGLISH