Kenwood KDC-3251RY Preparation, How to attach/detach the faceplate, How to reset your unit

Preparation

How to attach/detach the faceplate

1

1

2

2

Do not expose the faceplate to direct sunlight, excessive heat, or humidity. Also avoid places with too much dust or the possibility of water splashing.

Keep the faceplate in its casing while detached.

The faceplate is a precision piece of equipment and can be damaged by shocks or jolts.

To prevent deterioration, do not touch the terminals of the unit and faceplate with your fingers.

How to reset your unit

If this unit fails to operate properly, press the reset button.

The unit returns to factory settings when the reset button is pressed.

Reset b tton

Initial settings before operations

1Press SRC to enter [STANDBY] mode.

2 Press the volume knob to enter [FUNCTION] de.

3Turn the volume knob to select [INITIAL SET], then press to enter.

4 Turn the volume knob to make a sele ti n, then press to confirm. See table below for selection.

5 Hold to finish the procedure

Item	Selectable setting (Preset: *)
PRESET TYPE	NORM*: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/ LW). ;
	MIX: Memorizes one station for each preset button regardless of the selected band (FM1/ FM2/ FM3/ MW/ LW).
KEY BEEP	ON*/ OFF: Activates/deactivates the keypress tone.
RUSSIAN SET	ON: Folder name, file name, song title, artist name, album name are displayed in Russian (if applicable). ;
	OFF*: Cancels.
P-OFF WAIT	Sets the duration when the unit will automatically turns off (while in standby mode) to save the battery.
	––––: Cancels ; 20M*: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes
BUILTIN AUX	ON1*: Outputs sound of the connected external component when “AUX” is selected as the source. ;
	ON2: Outputs sound from the connected external component when “AUX” is selected as the source. When you
	turn on the power, the sound attenuates (to prevent noise when no external component is connected). Turn
	the volume knob clockwise to return to the previous volume level. ; OFF: Disables “AUX” in source selection.
CD READ	1*: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play as a music CD.
SWITCH PRE	REAR*/ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on the
	rear of the unit (through an external amplifier).
SP SELECT	OFF*/ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance.

[SWITCH PRE] is selectable only with KDC-3051R/ KDC-3051G/ KDC-315A/ KDC-315R/ KDC-3251RY.

4 Autogood products Internet store “130”