Listen to the Digital Radio (KDC-BT73DAB)
10-8. Replay
You can replay last about 7 minutes (audio bit rate: 128 kbps) of current service.
1Press [R]
“Replay Mode” appears and enters the Replay mode.
During Replay, you can perform the following operations:
Operation type | Operation |
Pause and play | Press and hold [1/6]. |
Forward or backward 15 seconds | Press [E] or [F]. |
Fast forward or Fast backward | Press and hold [E] or [F]. |
Exiting from the Replay mode.
Press [R]
The
10-9. Digital Radio setting
You can set the Digital Radio related items.
1Press [Control] knob.
Enters the Function setting mode.
2Select “Settings” using [Control] knob.
3Select a Digital Radio setting item using [Control] knob.
Display | Description |
“Seek Mode” | Sets the Digital Radio seek mode. |
| Refer to |
| Radio> (page 46) |
“DAB Priority” | When this setting item is set to ON, the |
| station will automatically switch to a Radio |
| Data System Broadcast with the same radio |
| program in event the reception for Digital |
| Radio becomes poor. |
| In the same manner, the station will |
| automatically switch to a Digital Radio |
| Broadcast with the same radio program in |
| event the reception for Radio Data System |
| becomes poor. (If the same program is not |
| being broadcasted on either, it will not switch |
| between Digital Radio and Radio Data System). |
| “ON” / “OFF” |
“DAB List Update” | Sets updating method for “DAB List Update” |
| Service list information. |
| “ON”: Automatically updates the service list |
| when ACC is turned ON. |
| “OFF”: Updates the service list only when [R] |
| is pressed and held. |
“PTY Watch” | When a broadcast with program type set to |
| “PTY Watch” starts with the ensemble currently |
| being received, the reception for broadcast |
| automatically switches to that program type. |
| Refer to |
| 48) |
| “Watch OFF” / program type (29 types) |
“TI” | Switches to the traffic information |
| automatically when the traffic bulletin starts. |
| “ON” / “OFF” |
“DAB Blend” | Prevents audio break when switching from |
| Digital Radio to Analog Radio. |
| “ON” / “OFF” |
(Colored text: Factory setting)
4Select a setting using [Control] knob. Returns to the previous item.
Exiting from the Function setting mode Press and hold [1/6].
10-10. Digital Radio initial settings
You can configure initial settings of Digital Radio.
1Press [SRC] to select a Standby (“STANDBY”). Refer to <Source selection> (page 14).
2Press [Control] knob.
Enters the Function setting mode.
3Select “Initial Settings” using [Control] knob. For how to use [Control] knob, refer to
4Select a Digital Radio initial setting item using [Control] knob.
Display | Description |
“DAB | Allows switching to L band when set to “ON”. |
| “ON” / “OFF” |
“DAB Antenna Power” | Sets power supply to the Digital Radio |
| antenna. Set to “ON” when the Digital Radio |
| antenna in use is equipped with a booster. |
| “ON” / “OFF” |
(Colored text: Factory setting)
5Select a setting using [Control] knob. Returns to the previous item.
Exiting from the Function setting mode Press and hold [1/6].
50 | English 51 |