Kenwood KDC-BT73DAB appendix Audio adjustments KDC-5057SD, Audio control, Audio preset

4. Audio adjustments (KDC-5057SD)

4-1. Audio control

You can adjust the audio control items.

1Press [SRC] to select a source other than Standby (“STANDBY”).

Refer to <Source selection> (page 14).

2Press [Control] knob.

Enters the Function setting mode.

3Select “Audio Control” using [Control] knob. For how to use [Control] knob, refer to <3-3. How to select the item> (page 13).

4Select a audio control item using [Control] knob.

Display			Audio control item	Range
“SubWoofer Level”			Subwoofer level	–15 — +15 (dB)
“Bass Level”			Bass level	–8 — +8 (dB)
“Middle Level”			Middle level	–8 — +8 (dB)
“Treble Level”			Treble level	–8 — +8 (dB)
“Equalizer PRO”
	“Bass Adjust”
		“Bass Center FRQ”	Bass Center Frequency	60/ 80/ 100/ 200 (Hz)
		“Bass Level”	Bass level	–8 — +8 (dB)
		“Bass Q Factor”	Bass Q Factor	1.00/ 1.25/ 1.50/ 2.00
		“Bass EXT”	Bass Extend	OFF/ ON
	“Middle Adjust”
		“Middle Center	Middle Center	0.5/ 1.0/ 1.5/ 2.5 (kHz)
		FRQ”	Frequency
		“Middle Level”	Middle level	–8 — +8 (dB)
		“Middle Q Factor”	Middle Q Factor	0.75/ 1.00/ 1.25
	“Treble Adjust”
		“Treble Center	Treble Center	10.0/ 12.5/ 15.0/
		FRQ”	Frequency	17.5 kHz
		“Treble Level”	Treble level	–8 — +8 (dB)
“Preset Equalizer”			Preset Equalizer curve	“Rock”/ “Pops”/ “Easy”/
				“Top40”/ “Jazz”/
				”Powerful”/ “Natural”/
				“User”[2]
“Bass Boost”			Bass Boost	“Level1”/ “Level2”/
				”Level3”/ “OFF”
“Loudness”			Loudness	“Level1”/ “Level2”/
				“OFF”
“Balance”			Balance	Left 15 — Right 15
“Fader”			Fader	Rear 15 — Front 15
“SubWoofer”			Subwoofer output	OFF/ ON
“Detailed Settings”

“HPF”	High Pass Filter	Through/ 100/ 120/
		150 (Hz)
“LPF SubWoofer”	Low Pass Filter	85/ 120/ 160/ Through
		(Hz)
“SubWoofer	Subwoofer Phase	Reverse (180°)/
Phase”		Normal (0°)
“Supreme”[3]	Supreme setting	ON/ OFF
“Audio Preset”	Audio Preset	Recall/ Memory
	memory[1]
“Volume Offset”	Volume offset	–8 — ±0 (dB)
		(AUX: -8 — +8)

[1]Refer to <4-2. Audio preset> (page 17), <4-3. Audio preset recall> (page 17).

[2]“User”: The customized Bass, Middle, and Treble settings are effective.

[3]Audio file source only

5Select a value using [Control] knob. Returns to the previous item.

Exiting from the Function setting mode Press and hold [1/6].

Adjusting Bass, Middle, and Treble levels

•You can set Bass, Middle, and Treble levels for each source.

4-2. Audio preset

You can register the values set the Audio control items.

1Set the audio control items

Refer to <4-1. Audio control> (page 16).

2Select “Audio Control” > “Detailed Settings” > “Audio Preset” > “Memory” using [Control] knob.

For how to use [Control] knob, refer to <3-3. How to select the item> (page 13).

3Select “YES” using [Control] knob. “Memory Completed” appears.

Exiting from the Function setting mode Press and hold [1/6].

Number of Audio preset memories that can be stored

•Register a pair of Audio preset memories. You cannot register them by source.

When reset

•When you press the Reset button, audio control values of all sources will be set to the values registered here.

Audio control items that can be registered

•The following Audio control items can be registered. “Bass Center FRQ”, “Bass Level”, “Bass Q Factor”, “Bass EXT”, “Middle Center FRQ”, “Middle Level”, “Middle Q Factor”, “Treble Center FRQ”, “Treble Level”, “SubWoofer Level”, “HPF”, “LPF SubWoofer”, “SubWoofer Phase”

4-3. Audio preset recall

You can recall the Audio control items registered to the <4-2. Audio preset> (page 17).

1Press [SRC] to select a recall source. Refer to <Source selection> (page 14).

2Press [Control] knob.

Enters the Function setting mode.

3Select “Audio Control” > “Detailed Settings” > “Audio Preset” > “Recall” using [Control] knob. For how to use [Control] knob, refer to <3-3. How to select the item> (page 13).

4Select “YES” using [Control] knob. “Recall Completed” appears.

Exiting from the Function setting mode Press and hold [1/6].

16 KDC-BT73DAB/ KDC-BT53U/ KDC-5057SD English 17