Alpine CDA-7990 manual Controlling CD Changer Optional, 42-EN

CD Player Operation

BAND

Disc Select buttons

1~6

FUNC

SOURCE Function indicator

Controlling CD Changer (Optional)

An optional 6-disc or 12-disc CD Changer may be connected to the CDA-7990 if it is Ai-NET compatible. With a CD Changer connected to the Ai-NET input of the CDA-7990, the CD Changer will be controllable from the CDA-7990.

Using the KCA-400C (the Multi-Changer Switching device) multiple changers can be controlled by the CDA-7990.

See the Multi-Changer Selection section on page 43 for selecting the CD Changers.

1 Press the SOURCE button to activate the CHANGER mode. The display shows the “Changer”, disc number and track number.

2 Press the Disc Select buttons (1 through 6) corresponding to one of the discs loaded in the CD Changer. The selected disc number appears in the display and CD playback starts.

<Display example of CD changer mode>

D 2 T 0 2 0 '1 1

CD playback elapsed time

Track Number

Disc Number

•The controls on the CDA-7990 for CD Changer operation are operative only when a CD Changer is connected.

•The “Changer” indicator illuminates in the CD Changer mode.

•The source indicator varies depending on the connected source.

•After selecting the desired disc, you can operate in the same way as for the CDA-7990 CD player. For details, please see the CD Operation section.

•If the function indicator lights in red, the Disc Select buttons become nonfunctional.

•Press the FUNC button to turn the function indicator to green, then, select the discs numbered from 1 to 6.

42-EN