Alpine CDA-7990 manual Multi-Changer Selection, 43-EN, When a 12-disc CD Changer is connected

Page 45

When a 12-disc CD Changer is connected:

To select discs numbered from 1 to 6, the proce- dure is the same as for the 6-disc CD Changer. To select discs numbered from 7 to 12, first press the FUNC button. This changes the “D” indicator to “d”. Then press the desired Disc Select button. With the FUNC button activated, the Disc Select buttons 1 to 6 will represent discs 7 to 12 respec- tively.

Multi-Changer Selection

Alpine’s Ai-NET system will support up to 6 CD Changers. When operating two or more changers, the KCA-400C (Multi-Changer Switching device) must be used. If you use 1 Switching device, you can connect up to 4 CD Changers. If you use 2 Switching devices, you can connect up to 6 CD Changers.

1 Press the SOURCE button on the CDA-7990 to activate the CD Changer mode.

Alternatively, press the SOURCE button on the optional Remote Control to activate the CD Changer mode. Proceed to Step 3 below to select the desired CD Changer.

2 Press the BAND button on the CDA-7990 or the optional Remote Control to activate the CD Changer Selection mode.

3 The CD Changer Selection mode remains active for 3 seconds after Step 2 is performed. Press the BAND button until the desired CD Changer indicator appears on the display.

Alternatively press the BAND button on the optional Remote Control until the desired changer indicator appears on the display.

4 To operate the selected changer, see “CD Operation” section.

•Press the FUNC button to turn the function indicator off, then, select the discs numbered from 7 to 12.

•If the selected CD Changer is not connected, the display will show “NO CHANGER”.

43-EN

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Page CDA-7990 Contents Do not Disassemble or Alter Maintenance TemperatureMoisture Condensation Damaged DiscNew Discs Never Attempt the FollowingInserting Discs Irregular Shaped DiscsDisc Cleaning Installation LocationDisc Accessories Handling the Detachable Front PanelDetaching the Front Panel Basic OperationInitial System Start-Up Attaching the Front PanelControllable with Remote Control Turning Power On and OffAdjusting Volume/Subwoofer RearAudio Mute Function Displaying Time Radio mode10-EN CD Player/Changer modes11-EN Setting Time12-EN Adjusting the Bass/Treble Center Frequencies13-EN Default values14-EN Setting when Using the Remote Control15-EN Switching the Tuner Mode16-EN Changing Lighting Color17-EN 18-EN CD Text Scroll Setting19-EN Subwoofer On and Off20-EN Digital Optical Output On and Off21-EN Setting the AUX Mode22-EN Turning Mute Mode On/Off23-EN Blackout Mode On and OffDisplaying the Title/Text 24-ENAbout Title and Text 25-EN CD/Changer mode26-EN Titling Discs/StationsFor example 27-EN28-EN Searching for Titled Stations29-EN Text30-EN Erasing Disc Title CD/CD Changer onlyRecalling the Stored Settings Switching the Disc Mode31-EN 32-EN Manual Tuning33-EN Automatic Seek Tuning34-EN Manual Storing of Station Presets35-EN Automatic Memory of Station Presets36-EN Storing into Direct Access Preset D.A.P. Band37-EN Tuning to Preset Stations38-EN PlaybackMusic Sensor Skip Fast Forward and Backward39-EN 40-EN Repeat PlayX. Random Play Scanning Programs41-EN 42-EN Controlling CD Changer OptionalWhen a 12-disc CD Changer is connected Multi-Changer Selection43-EN 44-EN Case of DifficultyUnable to fast forward or back- ward the CD 45-EN46-EN SpecificationsLimited Warranty Page Page Alpine ELECTRONICS, INC
Top Page Image Contents