Kenwood DT-7000S Saving/recalling music information Naming preset banks, Song Memory List Screen

Preset List Screen

Saved name

Data Saved Screen

Completed name

the presets. Each time you change a preset its number will appear on the display and the stream will play.

Option 2: Press the ENTER button. The Preset List Screen will appear on the display, listing all of the stream presets

that have been programmed

in all 4 banks (right)

• Use the CH./PRESET jog dial

(front panel) or CH Buttons (remote) to scroll through

the list. When the desired stream is highlighted on the

display, press the ENTER button to select it.

button on the unit.)

•If you make a mistake, use the CH buttons to move the cursor to the left of the letter you want to delete, and press the DELETE button.

6. Repeat Step 5 to complete the name (top, right).

7. Press the ENTER button to save your choice (second, right).

Press the SETUP button twice to exit the Setup Mode.

Saving/recalling music information

Naming preset banks

You can personalize the four banks of stream presets by assigning a name (up to 6 characters) to each one. For example, you can set up different preset banks for family members (‘Dad’, ‘Billy’, etc.), or assign a particular type of music to each one (‘Mellow’, ‘Party’, etc.).

Note: Although you can use the corresponding buttons on the unit to name the banks, it is simpler to use the remote.

1.Press the SETUP button to enter the Setup Mode.

2.Press the CAT buttons until the Bank Name Input screen appears (top, right).

3.Press the CH button once. The Bank Select screen will appear (second, right). Use the 4 arrow buttons to highlight the bank you want to name.

Bank Name Input Screen

Bank Select Screen

Bank Naming Screen

Saving music information

You can store the name of the current- ly-playing song and artist (and compos-

er, if the data is available) into memory

for recall later.

Press the MEMO button to save the data. The Data Saved screen will

display the following message for a few seconds (above):

•You can save data for up to 24 songs. Once all 24 places have been filled, any new artist/song data you save will replace the oldest data.

•If the song has already been stored in memory, the display will read “Already Stored”.

Recalling music information

1. Hold the MEMO button for more than 1 second. The Song Memory List screen will appear (right):

2. Use the CH./PRESET jog dial or CH
buttons to scroll through the list.	Song Memory List Screen

Press the MEMO button to exit.

Activating Song Seek

You can have the DT-7000S auto-matically prompt you when any of the songs saved on

4.Press the ENTER button. The Bank

Naming screen will appear (above). Press the DELETE button multiple times to delete all the letters of the existing name. (Note: There is no DELETE button on the unit.)

5.Press a number button multiple times to select the letters you want (right). When the letter you want is highlighted, press the ENTER button. The letter will appear in the name.

• To add spaces, press the SPACE	Selecting letters
button. (Note: There is no SPACE

the Song Memory List is playing on any
stream.
1. Activate the Song Memory List
screen (see previous section).
2. Use the CH./PRESET jog dial or CH	Song Seek Icon
buttons to scroll through the list of

saved songs until the one you want is highlighted.

3.Press and release the ENTER button. An “S” will appear next to the song’s name (above). Press the MEMO button to exit.

DT-7000S Instruction Manual

9