Alpine CDA-7998 owner manual Installation, Removal

Page 47

Installation

Caution (CDA-7897 only)

Do not block the unit’s fan or heat sink, thus preventing air circulation. If blocked, heat will accumulate inside the unit and may cause a fire.

 

Air ventilation

 

hole

1

<Rear side>

Mounting Sleeve

 

 

(Included)

Dashboard

�

CDA-7998/CDA-7897

Slide mounting sleeve from main unit (see "Removal" on this page).

Slide the mounting sleeve into the dashboard.

No Pressure Here

Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the CDA-7998/CDA-7897. Connect all other leads of the CDA-7998/CDA-7897 according to details described in the CONNECTlONS section.

3

Lock Pin

Slide the CDA-7998/CDA-7897 into the dashboard. When the unit is in place, make sure the locking pins are fully seated in the down position. This can be done by pressing firmly in on the unit while pushing the locking pin down with a small screwdriver. This ensures that the unit is properly locked and will not accidentally come out from the dashboard.

Removal

1Use a small screwdriver (or similar tool) to push the locking pins to the "up" position (see above drawing). As each pin is unlocked, gently pull out on the unit to make sure it does not re-lock before unlocking the second pin.

2Pull the unit out, keeping it unlocked as you do so.

< JAPANESE CAR >

No Pressure Here

2

Screw

 

Hex Nut (M5)

 

 

∗∗

 

Bolt Stud

Metal

 

Mounting

 

Strap

∗

 

CDA-7998/

Ground Lead

CDA-7897

 

Chassis

Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (∗) already attached to the vehicle's chassis.

NOTE

For the screw marked **, use an appropriate screw for the chosen mounting location.

Face Plate

Screws (M5 ⋅ 8)

CDA-7998/ (Included)

CDA-7897

Ground Lead

∗

Mounting Bracket

NOTE

Secure the ground lead of the unit to a clean metal spot using a screw (∗) already attached to the vehicle's chassis.

45-EN

Page 46 Page 48
Image 47
Page 46 Page 48
Contents CDA-7998/CDA-7897 CHA-1214CHM-S630 CHA-S634Contents XM Radio Operation Remote Control OperationCD Player Operation MP3 OperationPrecautions Never Attempt the Following Basic Operation CDA-7998 only Setting TimeAudio Mute Function Displaying Time→ Flatoff ↔ Pops ↔ Rock ↔ News ← Equalizer PresetsAdjusting and Storing the Equalizer Curve Button to select your desiredCrossover About the CrossoverCDA-7998 Adjusting and Storing the CrossoverTo store the adjusted contents WAY SystemExample 1. Listening Position Front Left Seat Recalling the Stored Crossover SettingsPress the T.CORR button to return to the normal mode About the Time CorrectionFront left-right Left front-rear Speakers Bass FocusExample 2. Listening Position All Seats Time Difference Table Example of Steps 2 and 3 SettingSetting the MX Mode Adjusting and Storing the Time CorrectionAbout Title and Text Blackout Mode On and OffQuick Searching Function Displaying the Title/TextElapsed Time Display Titling Discs/StationsErasing Disc Title/Station Title Switching the Display ModesDimmer Control CDA-7897 only Setup OperationSwitching the Tuner Mode Changing Lighting ColorSound Beep Guide Function Setting the Subwoofer OutputTurning Mute Mode On/Off Scroll SettingCDA-7897 only Setting the AUX Mode V-LinkConnecting to an External Amplifier Setting the Defeat Mode External InterruptDemonstration Adjusting Display Contrast CDA-7897 onlyOpening Message ON/OFF Setting CDA-7998 only Setting of Calendar Display Pattern Switching CDA-7998 only Switching the Animation Display type CDA-7998 onlyRadio Operation Manual TuningAutomatic Seek Tuning Manual Storing of Station PresetsTuning to Preset Stations Automatic Memory of Station PresetsAbout the usable discs CD Player OperationOpening and Closing the Movable display PlaybackOn handling Compact Discs CD/CD-R/ CD-RW Music Sensor SkipFast Forward and Backward Repeat Play→ M.I.X. → ALL M.I.X. → off X. Random PlayScanning Programs Controlling CD Changer OptionalMulti-Changer Selection → CD CHANGER∗ → Tuner ∗ Only when the CD changer is connectedPlaying MP3 Files Playing MP3 Files with the CD Changer OptionalFile Search Selecting FoldersAbout MP3 Setting the Range of MP3 File SelectionMP3 Operation Playing MP3 DataTerminology Checking the XM Radio ID Number Storing XM Channel PresetsXM Radio Operation Receiving XM Channels with the XM Receiver OptionalChanging the Display Receiving Stored XM ChannelsCategory Search About i-Personalize Personalize Operation CDA-7998 onlyData Downloading Incoming Calls Telephone Mode ON/OFFMobileHub Link OperationOption About MobileHub LinkCalling Short Mail Operation Controls on Remote Control Remote Control OperationBattery Replacement MEMORY1 Operating the Audio ProcessorRecalling StepsRadio InformationCase of Difficulty BasicIndication for CD Changer Indication for CD PlayerIndication for XM Radio Mode SpecificationsPrecautions Installation and ConnectionsRemoval InstallationTo prevent external noise from entering the audio system ConnectionsLow frequency range System whose frequency range is divided betweenPage ALPINE-1 Il vous faut remettre le produit nécessitant des réparationsDamage during shipment Limited Warranty

CDA-7998 specifications

The Alpine CDA-7998 is a high-performance car audio receiver renowned for its advanced features and superior sound quality. Designed for audiophiles and car enthusiasts alike, this model combines cutting-edge technology with a user-friendly interface to enhance the in-car listening experience.

One of the standout features of the CDA-7998 is its exceptional audio quality. The receiver is equipped with a 24-bit digital-to-analog converter (DAC), which processes sound with unparalleled precision, reducing distortion and increasing clarity. This technology allows users to enjoy their favorite music with exceptional accuracy, making every note and tone come alive.

Another remarkable aspect of the CDA-7998 is its versatile connectivity options. The unit includes a front USB input, enabling easy connection to various devices, such as flash drives or smartphones. Additionally, it incorporates a 3.5 mm auxiliary input for added flexibility, allowing users to connect external devices with ease. The receiver supports playback of various audio formats, including MP3, WMA, and AAC, providing users with a vast library of music to choose from.

The CDA-7998 also features Bluetooth technology, which allows for hands-free calling and wireless audio streaming. This is particularly beneficial for maintaining focus on the road while enjoying a seamless connection to mobile devices. The built-in microphone ensures clear communication during calls, while the audio streaming feature allows users to enjoy their playlist without the hassle of cables.

Customization is a key aspect of the CDA-7998. The receiver includes a 3-band parametric equalizer, enabling users to adjust bass, midrange, and treble frequencies according to their preferences. Additionally, with its customizable color display and button illumination, users can personalize the aesthetic of their car’s interior, enhancing the overall experience.

Furthermore, the CDA-7998 supports additional amplification with its dedicated line outputs for front, rear, and subwoofer channels. This allows for a multi-channel audio setup, delivering an immersive sound experience that can satisfy even the most discerning listeners.

Overall, the Alpine CDA-7998 is a sophisticated car audio receiver that combines advanced technology with unparalleled sound quality and customization options, making it an ideal choice for anyone looking to elevate their in-car audio experience.
Top Page Image Contents