Alpine CDA-9826, CDA-9827, cda-9825 owner manual Installation, Removal

Page 37

Installation

Caution

Do not block the unit’s fan or heat sink, thus preventing air circulation. If blocked, heat will accumulate inside the unit and may cause a fire.

Air ventilation hole

Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the CDA-9827/CDA-9826/CDA-9825. Connect all other leads of the CDA-9827/CDA-9826/CDA-9825 according to details described in the CONNECTlONS section.

3

1

<Rear side>

Mounting Sleeve (Included)

Lock Pin

No Pressure Here

Dashboard

No Pressure Here

This unit

Remove the Detachable Front Panel (refer to page 5). Slide mounting sleeve from main unit. (see “Removal” on this page).

Slide the mounting sleeve into the dashboard.

NOTE

Please examine the installation. Make certain that no external pressure is applied to either the top of the unit or the removable nosepiece.

2

Screw

Hex Nut (M5)

 

 

∗∗

 

Bolt Stud

Metal

 

Mounting

 

Strap

∗

 

This unit

Ground Lead

 

 

Chassis

Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (∗) already attached to the vehicle's chassis.

NOTE

For the screw marked **, use an appropriate screw for the chosen mounting location.

Slide the CDA-9827/CDA-9826/CDA-9825 into the dashboard. When the unit is in place, make sure the locking pins are fully seated in the down position. This can be done by pressing firmly in on the unit while pushing the locking pin down with a small screwdriver. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Install the Detachable Front Panel.

Removal

1 Remove the DETACHABLE FRONT PANEL.

2Use a small screwdriver (or similar tool) to push the locking pins to the “up” position (see above drawing). As each pin is unlocked, gently pull out on the unit to make sure it does not re-lock before unlocking the second pin.

3 Pull the unit out, keeping it unlocked as you do so.

<JAPANESE CAR>

Face Plate

Screws (M5 ⋅ 8) (Included)

This unit

Ground Lead

∗

Mounting Bracket

NOTE

Secure the ground lead of the unit to a clean metal spot using a screw (∗) already attached to the vehicle's chassis.

35-EN

Page 36 Page 38
Image 37
Page 36 Page 38
Contents CDA-9827/CDA-9826 Alpine CD Changers Give You More Contents Installation and Connections Precautions Never Attempt the Following Basic Operation Turning Power On and OffDetaching the Front Panel Attaching the Front PanelAudio Mute Function Setting TimeDisplaying Time Setting the Bass Type Setting the Bass Control Setting the Treble ControlBlackout Mode On and Off Setting the MX ModeDisplaying the Title/Text About the indicator displayAbout Title and Text Erasing Disc Title/Station Title Titling Discs/StationsScroll Setting Setup OperationSubwoofer On and Off Setting the Tone Defeat for External Devices Turning Mute Mode On/OffSetting the AUX Mode V-Link Amplifier Connecting to an External AmplifierAmplifierleft SpeakersAutomatic Seek Tuning Manual TuningManual Storing of Station Presets Radio OperationTuning to Preset Stations Automatic Memory of Station PresetsStation Title Search Function Quick Search FunctionInserting/Ejecting Disc CD Player OperationNormal Play and Pause Fast Forward and Backward Music Sensor SkipRepeat Play X. Random PlayTrack Search Function Scanning ProgramsControlling CD Changer Optional Multi-Changer Selection When a 12-disc CD Changer is connectedPlaying MP3 Files with the CD Changer Optional Playing MP3/WMA FilesFile Search mode Folder Search modePlaying MP3 Data Scanning files Folder/File Search FunctionXM Radio Operation Optional Storing XM Channel PresetsChecking the XM Radio ID Number Receiving XM Channels with the XM Receiver OptionalSetting the Auxiliary Data Field Display Setting the tuning methodChannel/Category Search Function Changing the DisplayMobileHub Link Operation Optional Telephone Mode ON/OFFAbout MobileHub Link Incoming CallsCalling SMS Short Message Service OperationControls on Remote Control CDA-9827 only Remote Control OperationBattery Replacement CDA-9827 only About MP3/WMA InformationBit rate Order of tracksSampling rate EncodingCase of Difficulty No Disc Antenna FM Tuner Section SpecificationsPrecautions Installation and ConnectionsRemoval InstallationCDA-9827 CDA-9825 only ConnectionsTo prevent external noise from entering the audio system Antenna Receptacle Power Antenna Lead BlueALPINE-1 Limited Warranty

cda-9825, CDA-9826, CDA-9827 specifications

The Alpine CDA-9826, CDA-9827, and CDA-9825 are remarkable head units that represent a blend of advanced technology, user-friendly design, and high-fidelity audio performance. These models cater to audiophiles and casual listeners alike, making them popular choices among car audio enthusiasts.

The CDA-9826 features a robust AM/FM tuner, enabling users to access their favorite radio stations with ease. With its built-in CD player, this unit supports CD-R and CD-RW playback, ensuring compatibility with a variety of disc formats. This model is also equipped with an auxiliary input, allowing for seamless connection of external devices, such as smartphones or portable music players. The intuitive interface boasts a large display that provides easy navigation through various settings and track information.

Moving on to the CDA-9827, this unit builds on the strengths of its predecessor. It incorporates an advanced digital signal processor (DSP), enhancing sound quality by optimizing audio signals for a clearer, more dynamic sound experience. The CDA-9827 also offers improved connectivity options, including a USB port that supports direct playback from USB devices and allows for song and artist identification. The unit's Bluetooth capability enables hands-free calling and wireless music streaming, making it a great choice for modern drivers who wish to stay connected while on the road.

The CDA-9825 is another impressive addition to Alpine's lineup, focusing more on providing essential features for a solid audio experience. While it may not have some of the more advanced options found in the 9826 and 9827 models, it still delivers excellent sound quality thanks to its powerful internal amplifier. The CDA-9825 supports various audio formats, including MP3 and WMA, ensuring listeners can enjoy their digital music library without hassle. Its equalizer settings allow users to customize their listening experience, tailoring sound profiles to their preferences.

All three models emphasize user-friendliness, featuring straightforward controls and responsive interfaces that allow drivers to adjust audio settings on the go. Alpine has prioritized aesthetic design as well, with sleek, modern finishes that complement any vehicle's interior. Collectively, the CDA-9826, CDA-9827, and CDA-9825 embody Alpine's commitment to quality sound and innovative technology, ensuring every journey is accompanied by an immersive audio experience. Whether for daily commutes or cross-country road trips, these head units make a significant impact on in-car entertainment.
Top Page Image Contents