PoGo Products T1 manual Network Setup, ‘DHCP On’ Setup Procedure

1.2.3 Network Setup

MEDIAGATE T1 can connect to a network. It is possible to obtain the IP address automatically from your DHCP Server

or Router, or manually set a specific IP address. Check your network environments.

üDHCP On: You can use this option to obtain the IP address automatically from a DHCP Server or Router.

üDHCP Off: When it is not possible to obtain the IP address automatically, you must use this option. Enter the IP address and Subnet mask manually.

‘DHCP On’ Setup Procedure

1. Press [SETUP] in the Mode Selection screen.

2.Select the ‘Network’ icon and press [ENTER]. Setup box will be displayed under the icon menu.

3.Select DHCP: On and press [ENTER].

4.Press [SETUP] to save the configurations.

üWhen you use ‘DHCP On’, you can see the IP address in the MENU screen after selecting the [PC-Network] icon in the Mode Selection screen.

12