üIf you are connected to a DHCP Server or Router, select ‘Obtain an IP address automatically’. You will be given an automatic IP Address and Subnet Mask.
9)Referring back to the Step 7) figure, click the ‘Advanced’ Tab. Disable ‘Internet Connection Firewall’ by
üIf you use Service Pack 2, refer to the following figures. Click ‘Settings’ at ‘Windows Firewall’
Check ‘Off’ and click ‘OK’
10) Set the network configurations of MEDIAGATE T1.
üYou must connect MEDIAGATE T1 to a TV set for this setup. See “3.1.1 Connect Video Cable”.
Press [SETUP] on MEDIAGATE T1 remote control to display the Setup screen. Select 
DHCP: Off
and enter the IP address & Subnet mask you want to use. For example, you may enter:
IP Address: 192.168.001.002
Subnet mask: 255.255.255.0
After entering the IP Address and Subnet, press [SETUP] again to save configurations.
52