SkyLink SC-10 Program Sensors and Transmitters To the Audio Alarm, Screwing the unit to the wall

Page 8

INSTALLATION

Screwing the unit to the wall

1. Unscrew the two triangular hanging tabs located at the back of the Audio Alarm.

2.Turn them around and slide them back into place so that the two tabs are pointing up and the two keyholes are visible from the front.

3.Position the Audio Alarm on the wall and insert the two screws in the two keyholes. Do not insert the screws all the way into the wall, leave some room on the screw to hang the Audio Alarm. We can also use the template if needed.

4.Open the small door on the bottom of the Audio Alarm.

5. Insert the AC adapter and the antenna in the appropriate holes.

6. Close the small door so that the AC adapter and the antenna are running through the appropriate spaces in the door.

INSTALLING THE DOOR/WINDOW SENSOR (WT-433)

It is recommended to install one sensor on your front door and the other on your back door.

Each contact sensor has 4 parts:

Transmitter Magnetic Switch

Magnet

 

Spacers

 

 

 

 

 

PROGRAM SENSORS AND TRANSMITTERS

TO THE AUDIO ALARM

The two Door/Window Sensors have been preprogrammed as well as the key- chain transmitter at the factory to communicate with the Audio Alarm. If after testing, there is no communication or you have purchased additional Door/ Window Sensors or Motion Sensors, (option), follow the instructions below:

Note: As many as 15 sensors and keychain transmitters can be programmed to communicate with the Audio Alarm.

Program Door/Window Sensors & Keychain Transmitter

1.With only the “ON” light lit on the Audio Alarm, press and hold the learn button located on the bottom of the Audio Alarm.

2.While pressing down on the button,

For Door/Window Sensor - press the button on top of the transmitter of the Door/Window Sensor.

For Keychain Transmitter - press any of the four buttons on the Key- chain Transmitter and hold for 2 seconds.

3.If a connection has been made, the Audio Alarm will stop beeping and make a continuous tone until the "learn" button on the Audio Alarm is released.

4.Now test the sensor by opening the door or window. If the Audio Alarm beeps, they are communicating.

Note: If you are alone while programming the sensors, take the Audio Alarm off the wall and bring it to the sensors so all the components are in one place.

–8–

–13–

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Total Protection Alarm System Customer ServiceAdditional Accessories Temperature Sensor TS-434Smoke Sensor SS-433 Audio Sensor AS-433Table of Contents Package Contents Battery Maintenance DOOR/WINDOW Sensor BatteryKeychain Transmitter Battery OverviewPlanning Your Home Security Needs Audio Alarm BatteryTo replace the Audio Alarm backup battery Installation Installing the Audio AlarmDelete Sensors and Transmitters Hanging it on two stationary screwsProgram Sensors and Transmitters To the Audio Alarm Installing the DOOR/WINDOW Sensor WT-433Screwing the unit to the wall Program Door/Window Sensors & Keychain TransmitterActivate and Deactivate the System Keychain Transmitter 4B-434Testing Your System Lights and SoundsLights Sounds

SC-10 specifications

The SkyLink SC-10 is a state-of-the-art drone that has garnered attention for its innovative design and advanced technological features. Ideal for both professional and personal use, the SC-10 combines high-performance capabilities with ease of operation, making it a versatile choice for various applications, from aerial photography to surveillance.

One of the standout features of the SkyLink SC-10 is its robust camera system. Equipped with a 4K Ultra HD camera, the drone captures stunning high-resolution images and videos, ensuring that every detail is perfectly rendered. With a three-axis gimbal stabilization system, users can expect stable and smooth footage even in windy conditions. The camera also supports real-time broadcasting, allowing operators to stream live video feeds directly to their devices.

In terms of flight capabilities, the SC-10 offers impressive performance. It has a flight time of up to 30 minutes on a single charge, which is above average for a drone in its class. This extended battery life allows for longer missions without the need for frequent recharging. The drone also features a control range of up to 5 kilometers, providing ample distance for exploration and capturing images over vast areas.

The SC-10 is engineered with advanced navigation technologies, including GPS and GLONASS support. This dual-satellite system enhances the drone's positional accuracy, making it more reliable during flight. Additionally, the drone features an intelligent return-to-home function, which automatically guides the drone back to its launch point in case of low battery or lost signal, enhancing safety during operation.

User-friendliness is another hallmark of the SkyLink SC-10. The drone comes with a dedicated mobile app that simplifies flight planning and control. The intuitive interface allows users to set waypoints, monitor flight statistics, and adjust camera settings effortlessly. Furthermore, the SC-10 supports various flight modes, including follow-me and orbit mode, catering to both novice and experienced pilots.

Another significant aspect of the SC-10 is its durable construction. Built with high-quality materials, it is designed to withstand the rigors of outdoor use. The foldable design makes it portable and easy to transport, making it a favored option for adventurers and professionals alike.

In summary, the SkyLink SC-10 combines superior imaging technology, long flight times, advanced navigation, and user-friendly features into a single package. Whether for capturing breathtaking landscapes or conducting critical surveillance, this drone stands out as a reliable and efficient tool for a variety of aerial needs.
Top Page Image Contents