SkyLink SC-10 manual Delete Sensors and Transmitters, Installation, Installing the Audio Alarm

Page 7

DELETE SENSORS AND TRANSMITTERS

You can not delete one sensor/transmitter from the Audio Alarm at a time. You must clear all the sensors and transmitters that are currnetly com- municating with the Audio Alarm, then re-program the ones you want to keep.

Delete All Sensors and Transmitters

1. Turn the Audio Alarm off by sliding the switch on the bottom of the Audio Alarm so that the “ON” light is not lit.

2. Press and hold the learn button found on the bottom of the Audio Alarm.

3. While holding the button, turn on the Audio Alarm by sliding the switch on the bottom.

4. You will hear a long beep followed by a series of short beeps. When you hear the short beeps, re- lease the learn button.

You have now cleared all sensors and transmitters from communicating with the Audio Alarm.

–14–

INSTALLATION

Installation is done using the screws included. For your convenience, we have also included wall anchors and a template to aid in the installation of the Audio Alarm and the Door/Window Sensors.

How to use the template to help in the installation:

1.Tape the template to the wall where you would like the component to be

2.Screw part way into the surface where the holes are marked on the template

3.Unscrew the screws and remove the template

4.Screw the component in place where you started the screws

We recommend that you install all components first with the double sided tape included and once you are satisfied with the positioning, reinstall using the screws.

INSTALLING THE AUDIO ALARM

The Audio Alarm is water resistance so it can be installed indoors or outdoors within access to an electrical outlet. Be careful that the AC adapter wire doesn't guide rain water to the DC JACK located at the bottom of the Audio Alarm.

There are two ways to attach the Audio Alarm to the wall:

Hanging it on two stationary screws

1.Using the template provided, insert the two screws into the wall.

2.Align the two top keyholes on the triangular tabs located at the back of the Audio Alarm with the screws on the wall.

3.Gently push the Audio Alarm on to these two screws.

4.Open the small door on the bottom of the

Audio Alarm.

5. Insert the AC adapter and the antenna in the appropriate holes.

6. Close the small door so that the AC adapter and the antenna are running through the appropriate spaces in the door.

–7–

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Customer Service Total Protection Alarm SystemAudio Sensor AS-433 Additional AccessoriesTemperature Sensor TS-434 Smoke Sensor SS-433Table of Contents Package Contents Overview Battery MaintenanceDOOR/WINDOW Sensor Battery Keychain Transmitter BatteryTo replace the Audio Alarm backup battery Audio Alarm BatteryPlanning Your Home Security Needs Hanging it on two stationary screws InstallationInstalling the Audio Alarm Delete Sensors and TransmittersProgram Door/Window Sensors & Keychain Transmitter Program Sensors and Transmitters To the Audio AlarmInstalling the DOOR/WINDOW Sensor WT-433 Screwing the unit to the wallKeychain Transmitter 4B-434 Activate and Deactivate the SystemSounds Testing Your SystemLights and Sounds Lights

SC-10 specifications

The SkyLink SC-10 is a state-of-the-art drone that has garnered attention for its innovative design and advanced technological features. Ideal for both professional and personal use, the SC-10 combines high-performance capabilities with ease of operation, making it a versatile choice for various applications, from aerial photography to surveillance.

One of the standout features of the SkyLink SC-10 is its robust camera system. Equipped with a 4K Ultra HD camera, the drone captures stunning high-resolution images and videos, ensuring that every detail is perfectly rendered. With a three-axis gimbal stabilization system, users can expect stable and smooth footage even in windy conditions. The camera also supports real-time broadcasting, allowing operators to stream live video feeds directly to their devices.

In terms of flight capabilities, the SC-10 offers impressive performance. It has a flight time of up to 30 minutes on a single charge, which is above average for a drone in its class. This extended battery life allows for longer missions without the need for frequent recharging. The drone also features a control range of up to 5 kilometers, providing ample distance for exploration and capturing images over vast areas.

The SC-10 is engineered with advanced navigation technologies, including GPS and GLONASS support. This dual-satellite system enhances the drone's positional accuracy, making it more reliable during flight. Additionally, the drone features an intelligent return-to-home function, which automatically guides the drone back to its launch point in case of low battery or lost signal, enhancing safety during operation.

User-friendliness is another hallmark of the SkyLink SC-10. The drone comes with a dedicated mobile app that simplifies flight planning and control. The intuitive interface allows users to set waypoints, monitor flight statistics, and adjust camera settings effortlessly. Furthermore, the SC-10 supports various flight modes, including follow-me and orbit mode, catering to both novice and experienced pilots.

Another significant aspect of the SC-10 is its durable construction. Built with high-quality materials, it is designed to withstand the rigors of outdoor use. The foldable design makes it portable and easy to transport, making it a favored option for adventurers and professionals alike.

In summary, the SkyLink SC-10 combines superior imaging technology, long flight times, advanced navigation, and user-friendly features into a single package. Whether for capturing breathtaking landscapes or conducting critical surveillance, this drone stands out as a reliable and efficient tool for a variety of aerial needs.
Top Page Image Contents