Brother Fix Your P Touch Errors: Text Too High and More

Error Message	Cause	Solution
	• This message appears if no	• Store a text file before trying
NO FILES!	files are stored in the	to recall or delete one.
	memory when you try to
	recall or delete one.
	• The message appears if you	• Press n to reduce.
OK TO REDUCE	select the PANEL2 Label	Press b to set the same
	Type mode, and when the
THE BLOCK NO.?	number of the desired blocks	or the more numbers of the
	is less than that of the text	blocks.
	mode, the number is reduced.
RECORD NOT	• This message appears when	• Try searching for different
	the specified text or record	text or a different record
FOUND!	number cannot be found in	number.
	the database.
TAPE CASSETTE	• This message appears if the	• Change the tape cassette
	tape cassette was changed	back again.
CHANGED!	while the P-touch labeler
	paused for the tape to be cut.
	• This message appears if the	• Reduce the size of the
TEXT TOO HIGH!	size of the text is larger than	characters, install a tape
	the width of the installed	with a greater width, or
XX BLOCK
	tape.	select the AUTO text size
		setting.
	• This message appears if the	• Press A, and then select a
	length of the text is longer
TEXT TOO LONG!		longer label length.
	than the label length that has
	been set with the Length
	function.
TEXT TOO LONG!	• This message appears if you	• Select a longer block length.
	try to print a label that is
XX BLOCK	longer than the specified
	block length.
	• This message appears if the	• Type in a value that is within
	value entered while setting	the allowable range.
	the Margin, Length, and
	Block Length function is not
	within the allowable range.
VALUE OUT OF	• This message appears if the
	specified characters cannot
RANGE!
	be found in the database.
	• This message appears if the
	values for the blocks,
	records or fields to be
	printed is not within the
	allowable range.

80