Brother PT-7600, PT-7500 manual Printing a range of text blocks

☞If the Cut function is set to 1 or 3, the message “CUT TAPE TO CONTINUE” appears after each label is printed. Press the tape cutter button to cut off the label and continue printing.

☞Be sure to cut the tape within 5 minutes from the time that the message appears.

☞For the different options available for cutting the tape, refer to Selecting how tape is fed and cut on page 42.

☞Letters and numbers increase as shown below.

0	Î 1	Î ...9 Î 0	Î ...
A	Î B	Î ...Z Î A	Î ...
a	Î b	Î ...z Î a	Î ...
A0	Î A1	Î ...A9Î B0	Î ...

Spaces (shown as underlines “_” in the examples below) can be used to adjust the

space between characters or to control the number of digits that are printed.

_Z Î AA Î ...ZZÎ AA Î ...

_9 Î 10 Î ...99Î 00 Î ...

1_9Î 2_0 Î ...9_9Î0_0 Î ...

☞Only one numbering field can be selected from any text.

☞A numbering field must be located entirely within one line of text of a single block.

☞A maximum of five characters can be selected for the numbering field.

☞If you include a non-alphanumeric character such as a symbol in the numbering field, only the letters and numbers in the numbering field will be increased when the labels are printed, or just one label will be printed if the field only contains a non- alphanumeric character.

☞To specify settings for additional Print Option functions, instead of continuing with step 9, press u or d until CONTINUE is displayed in the Print Option menu, and then press n.

☞If a bar code is selected as the numbering field in step 5, skip steps 6and 7, and continue with step 8.

Printing a range of text blocks
The Block Printing function enables you to select the range of
text blocks to print.
		NOP ST
1 Press g, then a.	LM QR UVWX
2 Press l or r until the first number in the range
		NOP
displayed below BLOCK NO. is flashing.
		QR

3Press u or d until the desired block number is

displayed (or use the number keys to type in the desired setting).

Basic Functions

37